5 Delkontrakt

5.1 Teknisk ID for partiet: LOT-0000

Titel: Closed-cycle Helium cryostat

Beskrivelse: Purchase of a top-loading closed-cycle helium cryostat with automated temperature\n control, includ-ing superconducting magnet for advanced research in optically active\n quantum dots and optical quantum control.

Intern identifikator: 8684

5.1.1 Formål

Kontraktens art: Varer

Primær klassificering (cpv): 38000000 Laboratorieudstyr, optisk udstyr og præcisionsudstyr (ikke briller)

Yderligere klassificering (cpv): 42513100 Fryseapparatur

5.1.2 Udførelsessted

Postadresse: Ørsteds Plads, Building 345A

By: Kgs. Lyngby

Postnummer: 2800

Landespecifik underafdeling (NUTS): Københavns omegn (DK012)

Land: Danmark

Yderligere oplysninger:

5.1.5 Værdi

Anslået værdi eksklusiv moms: 293.040 Euro

5.1.6 Generelle oplysninger

Indkøbsprojekt, der ikke finansieres med EU-midler

Udbuddet er omfattet af aftalen om offentlige udbud (GPA): ja

5.1.10 Tildelingskriterier

Kriterium:

Type: Pris

Vægtning (procentdel, præcis): 100

5.1.12 Udbudsvilkår

Oplysninger om undersøgelsesfrister: Complaint that the Contracting Authority, contrary to the Public Procurement Act,\n has concluded a contract without prior publication of a contract notice in the European\n Union Official Journal must be submitted no later than 30 calendar days from the date\n after a contract award notice has been published by the Contracting Authority in the\n European Union Official Journal and that contract award notice includes the grounds\n for the decision to award the contract directly, cf. lov om Klagenævnet for Udbud\n (Complaints Board for Tenders) § 7, section 3.

5.1.15 Teknikker

Rammeaftale:

Ingen rammeaftale

Oplysninger om det dynamiske indkøbssystem:

Intet dynamisk indkøbssystem

5.1.16 Yderligere oplysninger, mægling og gennemgang

Organisation med ansvar for klager: Klagenævnet for Udbud

Organisation, der leverer supplerende oplysninger om udbudsproceduren: Danmarks Tekniske Universitet - DTU

Organisation, der sikrer adgang til udbudsdokumenterne offline: Danmarks Tekniske Universitet - DTU

Organisation, der leverer yderligere oplysninger om klageprocedurerne: Konkurrence- og Forbrugerstyrelsen

Organisation, hvis budget anvendes til at betale for kontrakten: Danmarks Tekniske Universitet - DTU

Organisation, der udfører betalingen: Danmarks Tekniske Universitet - DTU

Organisation, der undertegner kontrakten: Danmarks Tekniske Universitet - DTU

TED eSender: Mercell Holding ASA

6 Resultater

Værdien af alle kontrakter tildelt i denne meddelelse: 293.040 Euro

Direkte tildeling:

Begrundelse for direkte tildeling: Kontrakten kan kun tildeles af en bestemt økonomisk aktør på grund af manglende konkurrence af tekniske årsager

Anden begrundelse: One of DTU Electro's research focus is on the optical properties of semiconductor\n quantum dots and the application of them for quantum information processing and quantum\n internet. Our research employs low-temperature (<4K) photoluminescence (PL), photoluminescence\n excitation (PLE), and resonant excitation (RE) techniques, which poses a series of\n stringent requirements for the cryostat that cools our sample to the desirable temperature\n range. Requirements for the cryostat system are: • Closed cycle cooling via pulse-tube\n technology to guarantee operation independent from liquid helium logistics • Base\n temperature below 1.8 K, fully automated temperature control between 1.8 and 300K,\n preferably via touchscreen • Temperature stability better than 10mK (below 10K) •\n A high-Magnetic field (9T) with a homogeneity of 0.1% over 10 mm (diameter spherical\n vol-ume) must be available at the full temperature range (1.8K – 300K) • Top loading\n cryostat to allow fast turnaround times while maintaining the magnet cold and operational\n • Low drifts to allow for long time measurements at any sample location • Automated\n temperature and magnetic field control via touch panel or/and PC • Cryogenic positioners\n with sub-nm resolution for focusing and sample scanning • Free-beam optical access\n to the sample with AR coated windows (exchangeable) • Preferably compatible with a\n removable, optical breadboard add-on for the cryostat which includes breadboard of\n at least 450 mm x 450 mm x 12.7 mm The cryostat system must be compatible with different\n types of inserts for microscopy. This requires: • Bore size of at least 49 mm to fit\n inserts with nanopositioners with at least 5 mm travel range in x and y and ~6 mm\n in z. • When a position is reached after a series of steps, zero voltage can be applied\n to the piezo, which minimizes the noise and drift caused by any external electronics.\n • The temperature control of the sample in the insert must be possible via the software\n interface of the cryostat itself, to allow for seamless operation • Extremely low\n vibrating environment to guarantee measurements at the nanometer level. DTU Electro\n has been searching the market for a closed-cycle cryostat with support for a strong\n magnet. We identified a list of potential suppliers and reached out to them. Upon\n comparison, we realized that attocube attoDRY2100 is the only company that offers\n a system that fulfills all of our key specifications for experimental stability and\n repeatability. attoDRY2100 cryostat has the following specs/properties: • The attoDRY2100\n is a top loading closed-cycle cryostat designed to include a superconducting magnet\n for high magnetic fields investigations. • The system offers a temperature range of\n 1.8 to 300K. • The temperature stability of the system is 10mK near base temperature,\n the only system in the market that satisfies our requirement. • A tunable magnetic\n field of up to 9 T in z direction at the entire temperature range. • Vibration amplitudes\n in vertical direction of less than 0.15 nm RMS (bandwidth of 200 Hz) with the pulse\n tube cooler running can be achieved. The only system in the market that satisfies\n our requirement. • The drift of a system consisting of an attoDRY unit and an optical\n confocal microscope has been measured to be less than 10 nm/h. The only system in\n the market that satisfies our requirement. • The sample space of the cryostat has\n a diameter of 49.7 mm. The system can be operated for several weeks and months at\n the base temperature of the magnet. This makes it possible to measure efficiently\n over a long period of time. Customized insert • The lower part of the 2” insert consists\n of a stable titanium housing. This makes it possible to achieve even better vibration\n values, as this housing can accommodate the somewhat larger and stiffer ANPx311 positioners,\n which also have a higher travel range than other positioners. • Attocube systems is\n the only company that can offer such an insert, and all parts come from a single company.\n This ensures that the system is perfectly harmonised. Nanopositioners ANP and ANS\n • The customized measurement insert comes fully equipped with xyz nanopositioners\n and scanners. Attocube systems holds the patents on these compact and stable nanopositioners\n which enable movement over several mm in nm steps (Patent WO 2006131089 and EP 0 823\n 738 B1). The nanopositioners have the following key features of great importance to\n the planned experiments: • The linear positioning stages ANPx311/RES/LT and ANPz102/RES/LT\n provide a travel range of 6 mm in XY-direction and 5 mm in Z-direction with steps\n sizes down to 50 nm at 300 K. • The fine positioning units ANSxy100lr/LT provide a\n scan range in two dimensions of at least 50 μm x 50 μm @ 300 K and 30 μm x 30 μm @\n 4 K. • When a position is reached after a series of steps, zero voltage can be applied\n to the piezo, which minimizes the noise and drift caused by any external electronics.\n • Only low to moderate voltages are needed to drive the positioners. In attocube systems’\n positioners, piezos with maximum 60 V or 150 V are used. As a consequence, shielding\n for high voltages is not necessary and cabling and connectors rated for low voltages\n can be used. As far as we know, attocube systems is the only company that has been\n able to prove the values on the basis of measurements, especially when a bandwidth\n is specified. We can therefore ensure to receive a complete and functioning system.\n To the best of our knowledge, the combination ‘at-toDRY2100 with 9T magnet and removable\n breadboard addon’ and ‘customized measurement insert with customized housing which\n allows attocube's ANPx311 positioner to be used for even better vibration values’\n from the attocube systems AG is the only solution on the market that offers all of\n the benefits and thus meets the key requirements of our lab. No other company worldwide\n can provide a complete system as outlined above.

6.1 Resultat delkontrakt-ID: LOT-0000

Der er udvalgt mindst én vinder.

6.1.2 Oplysninger om vinderne

Vinder:

Officielt navn: attocube systems AG

Tilbud:

Tilbud – Identifikator: 8684

Identifikator for delkontrakt eller gruppe af delkontrakter: LOT-0000

Værdien af resultatet: 2.166.187 Dansk krone

Underentrepriseværdien er kendt: nej

Underentrepriseprocentdelen er kendt: nej

Kontraktoplysninger:

Identifikator for kontrakten: 8684

Titel: Closed-cycle helium cryostat

Datoen for udvælgelsen af det vindende tilbud: 02-01-2024

Dato for indgåelse af kontrakten: 30-01-2024

Kontrakten tildeles som led i en rammeaftale: nej

Organisation, der undertegner kontrakten: Danmarks Tekniske Universitet - DTU

8 Organisationer

8.1 ORG-0001

Officielt navn: Danmarks Tekniske Universitet - DTU

Registreringsnummer: 30060946

Postadresse: Anker Engelunds Vej 1

By: Kgs. Lyngby

Postnummer: 2800

Land: Danmark

Kontaktpunkt: Marianne Dauding

E-mail: mardau@dtu.dk

Telefon: +45 33344398

Internetadresse: https://www.dtu.dk

Køberprofil: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863

Denne organisations roller:

Køber

Organisation, der leverer supplerende oplysninger om udbudsproceduren

Organisation, der sikrer adgang til udbudsdokumenterne offline

Organisation, der undertegner kontrakten

Organisation, hvis budget anvendes til at betale for kontrakten

Organisation, der udfører betalingen

8.1 ORG-0002

Officielt navn: Klagenævnet for Udbud

Registreringsnummer: 37795526

Postadresse: Nævnenes hus, Toldboden 2

By: Viborg

Postnummer: 8800

Land: Danmark

E-mail: klfu@erst.dk

Telefon: +45 35291000

Denne organisations roller:

Organisation med ansvar for klager

8.1 ORG-0003

Officielt navn: Konkurrence- og Forbrugerstyrelsen

Registreringsnummer: 10294819

Postadresse: Carl Jacobsens Vej 35

By: Valby

Postnummer: 2500

Land: Danmark

E-mail: kfst@kfst.dk

Telefon: +45 41715000

Denne organisations roller:

Organisation, der leverer yderligere oplysninger om klageprocedurerne

8.1 ORG-0004

Officielt navn: attocube systems AG

Registreringsnummer: DE813357627

Postadresse: Eglfinger Weg 2

By: Haar

Postnummer: 85540

Land: Tyskland

E-mail: info@attocube.com

Telefon: +49 89 420 797 0

Denne organisations roller:

Tilbudsgiver

Vinder af disse delkontrakter: LOT-0000

8.1 ORG-0005

Officielt navn: Mercell Holding ASA

Registreringsnummer: 980921565

Postadresse: Askekroken 11

By: Oslo

Postnummer: 0277

Landespecifik underafdeling (NUTS): Oslo (NO081)

Land: Norge

Kontaktpunkt: eSender

E-mail: publication@mercell.com

Telefon: +47 21018800

Fax: +47 21018801

Internetadresse: http://mercell.com/

Denne organisations roller:

TED eSender

5 Lot

5.1 Lot technical ID: LOT-0000

Title: Closed-cycle Helium cryostat

Description: Purchase of a top-loading closed-cycle helium cryostat with automated temperature\n control, includ-ing superconducting magnet for advanced research in optically active\n quantum dots and optical quantum control.

Internal identifier: 8684

5.1.1 Purpose

Main nature of the contract: Supplies

Main classification (cpv): 38000000 Laboratory, optical and precision equipments (excl. glasses)

Additional classification (cpv): 42513100 Freezing equipment

5.1.2 Place of performance

Postal address: Ørsteds Plads, Building 345A

Town: Kgs. Lyngby

Postcode: 2800

Country subdivision (NUTS): Københavns omegn (DK012)

Country: Denmark

Additional information:

5.1.5 Value

Estimated value excluding VAT: 293.040 Euro

5.1.6 General information

Procurement Project not financed with EU Funds.

The procurement is covered by the Government Procurement Agreement (GPA): yes

5.1.10 Award criteria

Criterion:

Type: Price

Weight (percentage, exact): 100

5.1.12 Terms of procurement

Information about review deadlines: Complaint that the Contracting Authority, contrary to the Public Procurement Act,\n has concluded a contract without prior publication of a contract notice in the European\n Union Official Journal must be submitted no later than 30 calendar days from the date\n after a contract award notice has been published by the Contracting Authority in the\n European Union Official Journal and that contract award notice includes the grounds\n for the decision to award the contract directly, cf. lov om Klagenævnet for Udbud\n (Complaints Board for Tenders) § 7, section 3.

5.1.15 Techniques

Framework agreement:

No framework agreement

Information about the dynamic purchasing system:

No dynamic purchase system

5.1.16 Further information, mediation and review

Review organisation: Klagenævnet for Udbud

Organisation providing additional information about the procurement procedure: Danmarks Tekniske Universitet - DTU

Organisation providing offline access to the procurement documents: Danmarks Tekniske Universitet - DTU

Organisation providing more information on the review procedures: Konkurrence- og Forbrugerstyrelsen

Organisation whose budget is used to pay for the contract: Danmarks Tekniske Universitet - DTU

Organisation executing the payment: Danmarks Tekniske Universitet - DTU

Organisation signing the contract: Danmarks Tekniske Universitet - DTU

TED eSender: Mercell Holding ASA

6 Results

Value of all contracts awarded in this notice: 293.040 Euro

Direct award:

Justification for direct award: The contract can be provided only by a particular economic operator because of an absence of competition for technical reasons

Other justification: One of DTU Electro's research focus is on the optical properties of semiconductor\n quantum dots and the application of them for quantum information processing and quantum\n internet. Our research employs low-temperature (<4K) photoluminescence (PL), photoluminescence\n excitation (PLE), and resonant excitation (RE) techniques, which poses a series of\n stringent requirements for the cryostat that cools our sample to the desirable temperature\n range. Requirements for the cryostat system are: • Closed cycle cooling via pulse-tube\n technology to guarantee operation independent from liquid helium logistics • Base\n temperature below 1.8 K, fully automated temperature control between 1.8 and 300K,\n preferably via touchscreen • Temperature stability better than 10mK (below 10K) •\n A high-Magnetic field (9T) with a homogeneity of 0.1% over 10 mm (diameter spherical\n vol-ume) must be available at the full temperature range (1.8K – 300K) • Top loading\n cryostat to allow fast turnaround times while maintaining the magnet cold and operational\n • Low drifts to allow for long time measurements at any sample location • Automated\n temperature and magnetic field control via touch panel or/and PC • Cryogenic positioners\n with sub-nm resolution for focusing and sample scanning • Free-beam optical access\n to the sample with AR coated windows (exchangeable) • Preferably compatible with a\n removable, optical breadboard add-on for the cryostat which includes breadboard of\n at least 450 mm x 450 mm x 12.7 mm The cryostat system must be compatible with different\n types of inserts for microscopy. This requires: • Bore size of at least 49 mm to fit\n inserts with nanopositioners with at least 5 mm travel range in x and y and ~6 mm\n in z. • When a position is reached after a series of steps, zero voltage can be applied\n to the piezo, which minimizes the noise and drift caused by any external electronics.\n • The temperature control of the sample in the insert must be possible via the software\n interface of the cryostat itself, to allow for seamless operation • Extremely low\n vibrating environment to guarantee measurements at the nanometer level. DTU Electro\n has been searching the market for a closed-cycle cryostat with support for a strong\n magnet. We identified a list of potential suppliers and reached out to them. Upon\n comparison, we realized that attocube attoDRY2100 is the only company that offers\n a system that fulfills all of our key specifications for experimental stability and\n repeatability. attoDRY2100 cryostat has the following specs/properties: • The attoDRY2100\n is a top loading closed-cycle cryostat designed to include a superconducting magnet\n for high magnetic fields investigations. • The system offers a temperature range of\n 1.8 to 300K. • The temperature stability of the system is 10mK near base temperature,\n the only system in the market that satisfies our requirement. • A tunable magnetic\n field of up to 9 T in z direction at the entire temperature range. • Vibration amplitudes\n in vertical direction of less than 0.15 nm RMS (bandwidth of 200 Hz) with the pulse\n tube cooler running can be achieved. The only system in the market that satisfies\n our requirement. • The drift of a system consisting of an attoDRY unit and an optical\n confocal microscope has been measured to be less than 10 nm/h. The only system in\n the market that satisfies our requirement. • The sample space of the cryostat has\n a diameter of 49.7 mm. The system can be operated for several weeks and months at\n the base temperature of the magnet. This makes it possible to measure efficiently\n over a long period of time. Customized insert • The lower part of the 2” insert consists\n of a stable titanium housing. This makes it possible to achieve even better vibration\n values, as this housing can accommodate the somewhat larger and stiffer ANPx311 positioners,\n which also have a higher travel range than other positioners. • Attocube systems is\n the only company that can offer such an insert, and all parts come from a single company.\n This ensures that the system is perfectly harmonised. Nanopositioners ANP and ANS\n • The customized measurement insert comes fully equipped with xyz nanopositioners\n and scanners. Attocube systems holds the patents on these compact and stable nanopositioners\n which enable movement over several mm in nm steps (Patent WO 2006131089 and EP 0 823\n 738 B1). The nanopositioners have the following key features of great importance to\n the planned experiments: • The linear positioning stages ANPx311/RES/LT and ANPz102/RES/LT\n provide a travel range of 6 mm in XY-direction and 5 mm in Z-direction with steps\n sizes down to 50 nm at 300 K. • The fine positioning units ANSxy100lr/LT provide a\n scan range in two dimensions of at least 50 μm x 50 μm @ 300 K and 30 μm x 30 μm @\n 4 K. • When a position is reached after a series of steps, zero voltage can be applied\n to the piezo, which minimizes the noise and drift caused by any external electronics.\n • Only low to moderate voltages are needed to drive the positioners. In attocube systems’\n positioners, piezos with maximum 60 V or 150 V are used. As a consequence, shielding\n for high voltages is not necessary and cabling and connectors rated for low voltages\n can be used. As far as we know, attocube systems is the only company that has been\n able to prove the values on the basis of measurements, especially when a bandwidth\n is specified. We can therefore ensure to receive a complete and functioning system.\n To the best of our knowledge, the combination ‘at-toDRY2100 with 9T magnet and removable\n breadboard addon’ and ‘customized measurement insert with customized housing which\n allows attocube's ANPx311 positioner to be used for even better vibration values’\n from the attocube systems AG is the only solution on the market that offers all of\n the benefits and thus meets the key requirements of our lab. No other company worldwide\n can provide a complete system as outlined above.

6.1 Result lot ldentifier: LOT-0000

At least one winner was chosen.

6.1.2 Information about winners

Winner:

Official name: attocube systems AG

Tender:

Tender identifier: 8684

Identifier of lot or group of lots: LOT-0000

Value of the result: 2.166.187 Danish krone

Subcontracting value is known: no

Subcontracting percentage is known: no

Contract information:

Identifier of the contract: 8684

Title: Closed-cycle helium cryostat

Date on which the winner was chosen: 02-01-2024

Date of the conclusion of the contract: 30-01-2024

The contract is awarded within a framework agreement: no

Organisation signing the contract: Danmarks Tekniske Universitet - DTU

8 Organisations

8.1 ORG-0001

Official name: Danmarks Tekniske Universitet - DTU

Registration number: 30060946

Postal address: Anker Engelunds Vej 1

Town: Kgs. Lyngby

Postcode: 2800

Country: Denmark

Contact point: Marianne Dauding

Email: mardau@dtu.dk

Telephone: +45 33344398

Internet address: https://www.dtu.dk

Buyer profile: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863

Roles of this organisation:

Buyer

Organisation providing additional information about the procurement procedure

Organisation providing offline access to the procurement documents

Organisation signing the contract

Organisation whose budget is used to pay for the contract

Organisation executing the payment

8.1 ORG-0002

Official name: Klagenævnet for Udbud

Registration number: 37795526

Postal address: Nævnenes hus, Toldboden 2

Town: Viborg

Postcode: 8800

Country: Denmark

Email: klfu@erst.dk

Telephone: +45 35291000

Roles of this organisation:

Review organisation

8.1 ORG-0003

Official name: Konkurrence- og Forbrugerstyrelsen

Registration number: 10294819

Postal address: Carl Jacobsens Vej 35

Town: Valby

Postcode: 2500

Country: Denmark

Email: kfst@kfst.dk

Telephone: +45 41715000

Roles of this organisation:

Organisation providing more information on the review procedures

8.1 ORG-0004

Official name: attocube systems AG

Registration number: DE813357627

Postal address: Eglfinger Weg 2

Town: Haar

Postcode: 85540

Country: Germany

Email: info@attocube.com

Telephone: +49 89 420 797 0

Roles of this organisation:

Tenderer

Winner of these lots: LOT-0000

8.1 ORG-0005

Official name: Mercell Holding ASA

Registration number: 980921565

Postal address: Askekroken 11

Town: Oslo

Postcode: 0277

Country subdivision (NUTS): Oslo (NO081)

Country: Norway

Contact point: eSender

Email: publication@mercell.com

Telephone: +47 21018800

Fax: +47 21018801

Internet address: http://mercell.com/

Roles of this organisation:

TED eSender