{"bekendtgoerelseNoegle":{"noticeId":{"value":"c7b18e55-fad3-4e45-b7ab-4fb73896cc76"},"noticeVersion":{"value":"01"},"noticePublicationNumber":{"value":"00628101-2026"}},"htmlDA":"\n\n \n 1 Køber1.1 KøberOfficielt navn: Danmarks Tekniske Universitet - DTU\n Køberens retlige status: Offentligretligt organ\n Den ordregivende myndigheds aktivitet: Uddannelse\n \n \n 2 Procedure2.1 ProcedureTitel: Delivery and installation of a High ion density etcher for lithium niobate on insulator\n - LiNb03 (LN)\n Beskrivelse: DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching\n lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later\n than Q4 2027. We are looking for a highly versatile instrument providing stable etch\n recipes, capable of etching at both nanometer scale and micrometer scale with precise\n control of etching depth, typically a few hundreds of nm. The instrument must have\n state-of-the-art performance in terms of profile control, uniformity, selectivity,\n and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The\n Instrument will be installed in the DTU Nanolab cleanroom - a university facility\n providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse\n community of over 200 active users, ranging from novice students to experienced researchers,\n as well a high percentage of commercial clients. At DTU Nanolab there are several\n research groups and companies working on developing and running small scale production\n of optical devises on the tools. Therefor the capability of etching smooth optical\n waveguide, gratings and other low-roughness optical devises are of high importance\n to us.\n Identifikator for proceduren: 3f758954-4e93-40e3-954b-d4f8b1299542\n \n Udbudsprocedure: Offentligt udbud\n Proceduren er en hasteprocedure: nej\n 2.1.1 FormålKontraktens hovedformål: Varer\n Supplerende kontrakttype: Tjenesteydelser\n Primær klassifikation (cpv): 42000000 Industrimaskiner\n Supplerende klassifikation (cpv): 38636110 Lasere til industriel brug\n Supplerende klassifikation (cpv): 38810000 Industrielle processtyringsanlæg\n \n 2.1.2 UdførelsesstedPostadresse: Technical University of Denmark, NanoLab, Ørsted Plads, Building 347 \n \n \n Landsdel (NUTS): Nordsjælland (DK013)\n \n \n 2.1.4 Generelle oplysningerYderligere oplysninger: General information on participation in the procurement procedure:
Participation\n in the procurement procedure may only take place electronically via the Contracting\n Authority’s electronic procurement system. To gain access to the procurement documents,\n the tenderer must be registered or register as a user. If the procurement documents\n contain multiple versions of the same document, the most recently uploaded version\n shall prevail.
All communication in connection with the procurement procedure,\n including questions and answers, must take place via the electronic procurement system.\n Questions must be submitted in due time to enable the Contracting Authority to obtain\n the necessary information and provide responses no later than six days before the\n expiry of the tender deadline. Questions received later than six days before the deadline\n cannot be expected to be answered unless the deadline is simultaneously extended.
Interested\n parties are encouraged to keep themselves informed via the electronic procurement\n system. If the applicant experiences technical issues with the system, support may\n be contacted via email at dksupport@eu-supply.com or by telephone at (+45) 70 20 80\n 14.
The tenderer must submit an ESPD as preliminary documentation for the\n matters referred to in the Danish Public Procurement Act. It is not necessary for\n the tenderer to sign the ESPD.
Prior to the award decision, the tenderer\n that the Contracting Authority intends to award the contract to must provide documentation\n for the information stated in the ESPD in accordance with sections 151–152 of the\n Danish Public Procurement Act, cf. section 153. As an alternative to the documentation\n referred to in sections 153–155, 157 and 158 of the Danish Public Procurement Act,\n the tenderer may submit a certificate of registration on an official list of approved\n economic operators, cf. section 156, issued by the competent authority. The Contracting\n Authority may only accept such certificates from tenderers established in the country\n that maintains the official list.
Language: All correspondence relating to\n the procurement must be in English. Tenders must be submitted in English. The final\n contract will be concluded in English.
The Contracting Authority may apply\n the procedure set out in section 159(5) of the Danish Public Procurement Act if the\n tender does not comply with the formal requirements set out in the procurement documents.
Please\n note that the procurement is covered by Article 5k of Council Regulation (EU) No 833/2014,\n as amended. This provision contains a prohibition against awarding contracts to Russian\n companies and companies under Russian control, etc. (see Article 5k(1) for the precise\n definition of the entities covered by the prohibition). The Contracting Authority\n reserves the right at any time during the procurement procedure to request documentation\n that the economic operators are not covered by the prohibition, for example by requiring\n a declaration to that effect and/or documentation regarding the place of establishment\n and ownership structure of the operators, as well as any subcontractors.\n \n \n \n 2.1.6 UdelukkelsesgrundeKilder til grundlag for udelukkelse: code|name|document-used-in-public-procurement.epo-sub-espd\n \n \n \n 5 Delkontrakt5.1 Delkontrakt: LOT-0000Titel: Delivery and installation of a High ion density etcher for lithium niobate on insulator\n - LiNb03 (LN)\n Beskrivelse: DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching\n lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later\n than Q4 2027. We are looking for a highly versatile instrument providing stable etch\n recipes, capable of etching at both nanometer scale and micrometer scale with precise\n control of etching depth, typically a few hundreds of nm. The instrument must have\n state-of-the-art performance in terms of profile control, uniformity, selectivity,\n and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The\n Instrument will be installed in the DTU Nanolab cleanroom - a university facility\n providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse\n community of over 200 active users, ranging from novice students to experienced researchers,\n as well a high percentage of commercial clients. At DTU Nanolab there are several\n research groups and companies working on developing and running small scale production\n of optical devises on the tools. Therefor the capability of etching smooth optical\n waveguide, gratings and other low-roughness optical devises are of high importance\n to us.\n \n 5.1.1 FormålKontraktens hovedformål: Varer\n Supplerende kontrakttype: Tjenesteydelser\n Primær klassifikation (cpv): 42000000 Industrimaskiner\n Supplerende klassifikation (cpv): 38636110 Lasere til industriel brug\n Supplerende klassifikation (cpv): 38810000 Industrielle processtyringsanlæg\n \n 5.1.2 UdførelsesstedPostadresse: Technical University of Denmark, NanoLab, Ørsted Plads, Building 347 \n \n \n Landsdel (NUTS): Nordsjælland (DK013)\n \n \n \n \n 5.1.6 Generelle oplysningerReserveret deltagelse: Deltagelse uden forbehold.\n Indkøbsprojekt, der ikke finansieres med EU-midler\n Udbuddet er omfattet af aftalen om offentlige udbud (GPA): ja\n Dette udbud er også egnet for små og mellemstore virksomheder (SMV'er): ja\n Yderligere oplysninger: General information on participation in the procurement procedure:
Participation\n in the procurement procedure may only take place electronically via the Contracting\n Authority’s electronic procurement system. To gain access to the procurement documents,\n the tenderer must be registered or register as a user. If the procurement documents\n contain multiple versions of the same document, the most recently uploaded version\n shall prevail.
All communication in connection with the procurement procedure,\n including questions and answers, must take place via the electronic procurement system.\n Questions must be submitted in due time to enable the Contracting Authority to obtain\n the necessary information and provide responses no later than six days before the\n expiry of the tender deadline. Questions received later than six days before the deadline\n cannot be expected to be answered unless the deadline is simultaneously extended.
Interested\n parties are encouraged to keep themselves informed via the electronic procurement\n system. If the applicant experiences technical issues with the system, support may\n be contacted via email at dksupport@eu-supply.com or by telephone at (+45) 70 20 80\n 14.
The tenderer must submit an ESPD as preliminary documentation for the\n matters referred to in the Danish Public Procurement Act. It is not necessary for\n the tenderer to sign the ESPD.
Prior to the award decision, the tenderer\n that the Contracting Authority intends to award the contract to must provide documentation\n for the information stated in the ESPD in accordance with sections 151–152 of the\n Danish Public Procurement Act, cf. section 153. As an alternative to the documentation\n referred to in sections 153–155, 157 and 158 of the Danish Public Procurement Act,\n the tenderer may submit a certificate of registration on an official list of approved\n economic operators, cf. section 156, issued by the competent authority. The Contracting\n Authority may only accept such certificates from tenderers established in the country\n that maintains the official list.
Language: All correspondence relating to\n the procurement must be in English. Tenders must be submitted in English. The final\n contract will be concluded in English.
The Contracting Authority may apply\n the procedure set out in section 159(5) of the Danish Public Procurement Act if the\n tender does not comply with the formal requirements set out in the procurement documents.
Please\n note that the procurement is covered by Article 5k of Council Regulation (EU) No 833/2014,\n as amended. This provision contains a prohibition against awarding contracts to Russian\n companies and companies under Russian control, etc. (see Article 5k(1) for the precise\n definition of the entities covered by the prohibition). The Contracting Authority\n reserves the right at any time during the procurement procedure to request documentation\n that the economic operators are not covered by the prohibition, for example by requiring\n a declaration to that effect and/or documentation regarding the place of establishment\n and ownership structure of the operators, as well as any subcontractors.\n \n \n 5.1.9 UdvælgelseskriterierKilder til udvælgelseskriterier: Bekendtgørelse\n Kriterium: Referencer på specificerede tjenesterBeskrivelse af udvælgelseskriterium: The Tenderer must show that it has the technical and professional ability to fulfil\n the contract. The Ten-derer must demonstrate this by providing at least 3 relevant\n references for comparable agreements, showing that the Tenderer has previously delivered,\n installed and serviced a High ion density plasma etcher for etching of lithium niobate\n on insulator, substantially equivalent to the Instrument.
The agreement, to which\n the reference refers, must not be more than 5 years old. The date is calculated from\n the last delivery date of the machine under the agreement in the reference.\n \n \n 5.1.10 TildelingskriterierKriterium:\n \n Beskrivelse: Based on the offered prices\n Kategori for tildelingskriteriet vægt: Vægtning (procentdel, præcis)Tildelingskriterium talværdi: 20\n \n \n Kriterium:\n Navn: Quality, Functionality and Performance\n Beskrivelse: Based on the tenderers answers to Appendix 1\n Kategori for tildelingskriteriet vægt: Vægtning (procentdel, præcis)Tildelingskriterium talværdi: 80\n \n \n \n 5.1.11 TilbudsdokumenterSprog, som udbudsdokumenterne er officielt tilgængelige på: engelsk\n Frist for anmodning om yderligere oplysninger: 08-10-2026 10:00 +00:00\n Adresse på udbudsdokumenterne: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B=\n \n 5.1.12 TilbudsvilkårVilkår for indgivelse:Elektronisk indgivelse: Påkrævet\n Indgivelsesadresse: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B=\n Sprog, som tilbud og ansøgninger om deltagelse kan indgives på: engelsk\n Elektronisk katalog: Ikke tilladt\n Alternative tilbud: Ikke tilladt\n Tilbudsgivere kan indgive mere end ét tilbud: Ikke tilladt\n Frist for modtagelse af tilbud: 15-10-2026 21:55 +00:00\n Varighed, hvor tilbuddet skal forblive gyldigt: 90 Døgn\n \n Betingelser for kontraktens udførelse:Udførelsen af kontrakten skal ske inden for rammerne af programmer for beskyttet beskæftigelse: Nej\n Vilkår relateret til kontraktens udførelse: Please see the draft agreement which is part of the tender material.\n Der kræves en fortrolighedsaftale: nej\n Elektronisk fakturering: Tilladt\n Der vil blive anvendt elektronisk bestilling: ja\n Der vil blive anvendt elektronisk betaling: ja\n \n \n 5.1.15 Teknikker\n Oplysninger om det dynamiske indkøbssystem:Intet dynamisk indkøbssystem\n \n \n 5.1.16 Yderligere oplysninger, mægling og gennemgangOrganisation med ansvar for klager: Klagenævnet for Udbud\n Oplysninger om klagefrister: Complaint regarding the award of a contract must be submitted no later than 45 calendar\n days from the date after the Contracting Authority has published a notice in the European\n Union Official Journal informing that the Contracting Authority has awarded/concluded\n a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section\n 2, no. 1.\n Organisation, der leverer supplerende oplysninger om udbudsproceduren: Danmarks Tekniske Universitet - DTU\n Organisation, der sikrer adgang til udbudsdokumenterne offline: Danmarks Tekniske Universitet - DTU\n Organisation, der leverer yderligere oplysninger om klageprocedurerne: Konkurrence- og Forbrugerstyrelsen\n \n \n \n 8 Organisationer8.1 ORG-0001Officielt navn: Danmarks Tekniske Universitet - DTU\n Registreringsnummer: 30060946\n Postadresse: Anker Engelunds Vej 1 \n \n \n Landsdel (NUTS): Nordsjælland (DK013)\n \n \n \n \n Internetadresse: https://www.dtu.dk\n Køberprofil: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863\n Denne organisations roller:\n Organisation, der leverer supplerende oplysninger om udbudsproceduren\n Organisation, der sikrer adgang til udbudsdokumenterne offline\n \n \n 8.1 ORG-0002Officielt navn: Klagenævnet for Udbud\n Registreringsnummer: 37795526\n Postadresse: Nævnenes hus, Toldboden 2 \n \n \n Landsdel (NUTS): Østjylland (DK042)\n \n \n \n Internetadresse: http://www.klfu.dk\n Denne organisations roller:Organisation med ansvar for klager\n \n \n 8.1 ORG-0003Officielt navn: Konkurrence- og Forbrugerstyrelsen\n Registreringsnummer: 10294819\n Postadresse: Carl Jacobsens Vej 35 \n \n \n Landsdel (NUTS): Byen København (DK011)\n \n \n \n Internetadresse: http://www.kfst.dk\n Denne organisations roller:Organisation, der leverer yderligere oplysninger om klageprocedurerne\n \n \n 8.1 ORG-0004Officielt navn: Mercell Holding ASA\n Registreringsnummer: 980921565\n Postadresse: Askekroken 11 \n \n \n Landsdel (NUTS): Oslo (NO081)\n \n \n E-mail: publication@mercell.com\n \n \n Internetadresse: http://mercell.com/\n Denne organisations roller:\n \n \n \n Oplysninger om bekendtgørelsenBekendtgørelsens ID: c7b18e55-fad3-4e45-b7ab-4fb73896cc76 - 01\n Formulartype: Konkurrencevilkår\n Bekendtgørelsestype: Udbuds- eller koncessionsbekendtgørelse – standardordningen\n Afsendelsesdato for bekendtgørelsen: 10-09-2026 06:51 +00:00\n Dato for afsendelse af bekendtgørelsen (eSender): 10-09-2026 10:01 +00:00\n Bekendtgørelsens officielle sprog: engelsk \n Bekendtgørelsesnummer: 00628101-2026\n \n Offentliggørelsesdato: 11-09-2026\n \n \n","htmlEN":"\n\n \n 1 Buyer1.1 BuyerOfficial name: Danmarks Tekniske Universitet - DTU\n Legal type of the buyer: Body governed by public law\n Activity of the contracting authority: Education\n \n \n 2 Procedure2.1 ProcedureTitle: Delivery and installation of a High ion density etcher for lithium niobate on insulator\n - LiNb03 (LN)\n Description: DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching\n lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later\n than Q4 2027. We are looking for a highly versatile instrument providing stable etch\n recipes, capable of etching at both nanometer scale and micrometer scale with precise\n control of etching depth, typically a few hundreds of nm. The instrument must have\n state-of-the-art performance in terms of profile control, uniformity, selectivity,\n and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The\n Instrument will be installed in the DTU Nanolab cleanroom - a university facility\n providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse\n community of over 200 active users, ranging from novice students to experienced researchers,\n as well a high percentage of commercial clients. At DTU Nanolab there are several\n research groups and companies working on developing and running small scale production\n of optical devises on the tools. Therefor the capability of etching smooth optical\n waveguide, gratings and other low-roughness optical devises are of high importance\n to us.\n Procedure identifier: 3f758954-4e93-40e3-954b-d4f8b1299542\n Internal identifier: 10528\n \n The procedure is accelerated: no\n 2.1.1 PurposeMain nature of the contract: Supplies\n Additional nature of the contract: Services\n Main classification (cpv): 42000000 Industrial machinery\n Additional classification (cpv): 38636110 Industrial lasers\n Additional classification (cpv): 38810000 Industrial process control equipment\n \n 2.1.2 Place of performancePostal address: Technical University of Denmark, NanoLab, Ørsted Plads, Building 347 \n \n \n Country subdivision (NUTS): Nordsjælland (DK013)\n \n \n 2.1.4 General informationAdditional information: General information on participation in the procurement procedure:
Participation\n in the procurement procedure may only take place electronically via the Contracting\n Authority’s electronic procurement system. To gain access to the procurement documents,\n the tenderer must be registered or register as a user. If the procurement documents\n contain multiple versions of the same document, the most recently uploaded version\n shall prevail.
All communication in connection with the procurement procedure,\n including questions and answers, must take place via the electronic procurement system.\n Questions must be submitted in due time to enable the Contracting Authority to obtain\n the necessary information and provide responses no later than six days before the\n expiry of the tender deadline. Questions received later than six days before the deadline\n cannot be expected to be answered unless the deadline is simultaneously extended.
Interested\n parties are encouraged to keep themselves informed via the electronic procurement\n system. If the applicant experiences technical issues with the system, support may\n be contacted via email at dksupport@eu-supply.com or by telephone at (+45) 70 20 80\n 14.
The tenderer must submit an ESPD as preliminary documentation for the\n matters referred to in the Danish Public Procurement Act. It is not necessary for\n the tenderer to sign the ESPD.
Prior to the award decision, the tenderer\n that the Contracting Authority intends to award the contract to must provide documentation\n for the information stated in the ESPD in accordance with sections 151–152 of the\n Danish Public Procurement Act, cf. section 153. As an alternative to the documentation\n referred to in sections 153–155, 157 and 158 of the Danish Public Procurement Act,\n the tenderer may submit a certificate of registration on an official list of approved\n economic operators, cf. section 156, issued by the competent authority. The Contracting\n Authority may only accept such certificates from tenderers established in the country\n that maintains the official list.
Language: All correspondence relating to\n the procurement must be in English. Tenders must be submitted in English. The final\n contract will be concluded in English.
The Contracting Authority may apply\n the procedure set out in section 159(5) of the Danish Public Procurement Act if the\n tender does not comply with the formal requirements set out in the procurement documents.
Please\n note that the procurement is covered by Article 5k of Council Regulation (EU) No 833/2014,\n as amended. This provision contains a prohibition against awarding contracts to Russian\n companies and companies under Russian control, etc. (see Article 5k(1) for the precise\n definition of the entities covered by the prohibition). The Contracting Authority\n reserves the right at any time during the procurement procedure to request documentation\n that the economic operators are not covered by the prohibition, for example by requiring\n a declaration to that effect and/or documentation regarding the place of establishment\n and ownership structure of the operators, as well as any subcontractors.\n \n \n \n 2.1.6 Grounds for exclusionSources of grounds for exclusion: code|name|document-used-in-public-procurement.epo-sub-espd\n \n \n \n 5 Lot5.1 Lot: LOT-0000Title: Delivery and installation of a High ion density etcher for lithium niobate on insulator\n - LiNb03 (LN)\n Description: DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching\n lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later\n than Q4 2027. We are looking for a highly versatile instrument providing stable etch\n recipes, capable of etching at both nanometer scale and micrometer scale with precise\n control of etching depth, typically a few hundreds of nm. The instrument must have\n state-of-the-art performance in terms of profile control, uniformity, selectivity,\n and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The\n Instrument will be installed in the DTU Nanolab cleanroom - a university facility\n providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse\n community of over 200 active users, ranging from novice students to experienced researchers,\n as well a high percentage of commercial clients. At DTU Nanolab there are several\n research groups and companies working on developing and running small scale production\n of optical devises on the tools. Therefor the capability of etching smooth optical\n waveguide, gratings and other low-roughness optical devises are of high importance\n to us.\n Internal identifier: 10528\n 5.1.1 PurposeMain nature of the contract: Supplies\n Additional nature of the contract: Services\n Main classification (cpv): 42000000 Industrial machinery\n Additional classification (cpv): 38636110 Industrial lasers\n Additional classification (cpv): 38810000 Industrial process control equipment\n \n 5.1.2 Place of performancePostal address: Technical University of Denmark, NanoLab, Ørsted Plads, Building 347 \n \n \n Country subdivision (NUTS): Nordsjælland (DK013)\n \n \n \n 5.1.3 Estimated duration\n \n 5.1.6 General informationReserved participation: Participation is not reserved.\n Procurement Project not financed with EU Funds.\n The procurement is covered by the Government Procurement Agreement (GPA): yes\n This procurement is also suitable for small and medium-sized enterprises (SMEs): yes\n Additional information: General information on participation in the procurement procedure:
Participation\n in the procurement procedure may only take place electronically via the Contracting\n Authority’s electronic procurement system. To gain access to the procurement documents,\n the tenderer must be registered or register as a user. If the procurement documents\n contain multiple versions of the same document, the most recently uploaded version\n shall prevail.
All communication in connection with the procurement procedure,\n including questions and answers, must take place via the electronic procurement system.\n Questions must be submitted in due time to enable the Contracting Authority to obtain\n the necessary information and provide responses no later than six days before the\n expiry of the tender deadline. Questions received later than six days before the deadline\n cannot be expected to be answered unless the deadline is simultaneously extended.
Interested\n parties are encouraged to keep themselves informed via the electronic procurement\n system. If the applicant experiences technical issues with the system, support may\n be contacted via email at dksupport@eu-supply.com or by telephone at (+45) 70 20 80\n 14.
The tenderer must submit an ESPD as preliminary documentation for the\n matters referred to in the Danish Public Procurement Act. It is not necessary for\n the tenderer to sign the ESPD.
Prior to the award decision, the tenderer\n that the Contracting Authority intends to award the contract to must provide documentation\n for the information stated in the ESPD in accordance with sections 151–152 of the\n Danish Public Procurement Act, cf. section 153. As an alternative to the documentation\n referred to in sections 153–155, 157 and 158 of the Danish Public Procurement Act,\n the tenderer may submit a certificate of registration on an official list of approved\n economic operators, cf. section 156, issued by the competent authority. The Contracting\n Authority may only accept such certificates from tenderers established in the country\n that maintains the official list.
Language: All correspondence relating to\n the procurement must be in English. Tenders must be submitted in English. The final\n contract will be concluded in English.
The Contracting Authority may apply\n the procedure set out in section 159(5) of the Danish Public Procurement Act if the\n tender does not comply with the formal requirements set out in the procurement documents.
Please\n note that the procurement is covered by Article 5k of Council Regulation (EU) No 833/2014,\n as amended. This provision contains a prohibition against awarding contracts to Russian\n companies and companies under Russian control, etc. (see Article 5k(1) for the precise\n definition of the entities covered by the prohibition). The Contracting Authority\n reserves the right at any time during the procurement procedure to request documentation\n that the economic operators are not covered by the prohibition, for example by requiring\n a declaration to that effect and/or documentation regarding the place of establishment\n and ownership structure of the operators, as well as any subcontractors.\n \n 5.1.7 Strategic procurement\n 5.1.9 Selection criteriaSources of selection criteria: Notice\n Criterion: References on specified servicesDescription of selection criterion: The Tenderer must show that it has the technical and professional ability to fulfil\n the contract. The Ten-derer must demonstrate this by providing at least 3 relevant\n references for comparable agreements, showing that the Tenderer has previously delivered,\n installed and serviced a High ion density plasma etcher for etching of lithium niobate\n on insulator, substantially equivalent to the Instrument.
The agreement, to which\n the reference refers, must not be more than 5 years old. The date is calculated from\n the last delivery date of the machine under the agreement in the reference.\n \n \n 5.1.10 Award criteriaCriterion:\n \n Description: Based on the offered prices\n Category of award weight criterion: Weight (percentage, exact)Award criterion number: 20\n \n \n Criterion:\n Name: Quality, Functionality and Performance\n Description: Based on the tenderers answers to Appendix 1\n Category of award weight criterion: Weight (percentage, exact)Award criterion number: 80\n \n \n \n 5.1.11 Procurement documentsLanguages in which the procurement documents are officially available: English\n Deadline for requesting additional information: 08-10-2026 10:00 +00:00\n Address of the procurement documents: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B=\n \n 5.1.12 Terms of procurementTerms of submission:Electronic submission: Required\n Address for submission: https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B=\n Languages in which tenders or requests to participate may be submitted: English\n Electronic catalogue: Not allowed\n \n Tenderers may submit more than one tender: Not allowed\n Deadline for receipt of tenders: 15-10-2026 21:55 +00:00\n Duration during which the tender must remain valid: 90 Day\n \n Terms of contract:The execution of the contract must be performed within the framework of sheltered employment programmes: No\n Conditions relating to the performance of the contract: Please see the draft agreement which is part of the tender material.\n A non-disclosure agreement is required: no\n Electronic invoicing: Allowed\n Electronic ordering will be used: yes\n Electronic payment will be used: yes\n \n \n 5.1.15 Techniques\n Information about the dynamic purchasing system:No dynamic purchase system\n \n \n 5.1.16 Further information, mediation and reviewReview organisation: Klagenævnet for Udbud\n Information about review deadlines: Complaint regarding the award of a contract must be submitted no later than 45 calendar\n days from the date after the Contracting Authority has published a notice in the European\n Union Official Journal informing that the Contracting Authority has awarded/concluded\n a contract, cf. lov om Klagenævnet for Udbud (Complaints Board for Tenders) § 7, Section\n 2, no. 1.\n Organisation providing additional information about the procurement procedure: Danmarks Tekniske Universitet - DTU\n Organisation providing offline access to the procurement documents: Danmarks Tekniske Universitet - DTU\n Organisation providing more information on the review procedures: Konkurrence- og Forbrugerstyrelsen\n \n \n \n 8 Organisations8.1 ORG-0001Official name: Danmarks Tekniske Universitet - DTU\n Registration number: 30060946\n Postal address: Anker Engelunds Vej 1 \n \n \n Country subdivision (NUTS): Nordsjælland (DK013)\n \n Contact point: Mikkel Taanum\n \n \n Internet address: https://www.dtu.dk\n Buyer profile: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863\n Roles of this organisation:\n Organisation providing additional information about the procurement procedure\n Organisation providing offline access to the procurement documents\n \n \n 8.1 ORG-0002Official name: Klagenævnet for Udbud\n Registration number: 37795526\n Postal address: Nævnenes hus, Toldboden 2 \n \n \n Country subdivision (NUTS): Østjylland (DK042)\n \n \n \n Internet address: http://www.klfu.dk\n Roles of this organisation:\n \n \n 8.1 ORG-0003Official name: Konkurrence- og Forbrugerstyrelsen\n Registration number: 10294819\n Postal address: Carl Jacobsens Vej 35 \n \n \n Country subdivision (NUTS): Byen København (DK011)\n \n \n \n Internet address: http://www.kfst.dk\n Roles of this organisation:Organisation providing more information on the review procedures\n \n \n 8.1 ORG-0004Official name: Mercell Holding ASA\n Registration number: 980921565\n Postal address: Askekroken 11 \n \n \n Country subdivision (NUTS): Oslo (NO081)\n \n \n Email: publication@mercell.com\n \n \n Internet address: http://mercell.com/\n Roles of this organisation:\n \n \n \n Notice informationNotice identifier/version: c7b18e55-fad3-4e45-b7ab-4fb73896cc76 - 01\n \n Notice type: Contract or concession notice – standard regime\n Notice dispatch date: 10-09-2026 06:51 +00:00\n Notice dispatch date (eSender): 10-09-2026 10:01 +00:00\n Languages in which this notice is officially available: English \n Notice publication number: 00628101-2026\n OJ S issue number: 176/2026\n Publication date: 11-09-2026\n \n \n","opsummeringDA":{"card":{"titel":"Delivery and installation of a High ion density etcher for lithium niobate on insulator - LiNb03 (LN)","ordregiver":"Danmarks Tekniske Universitet - DTU","ordregiverId":"30060946","ordregiverIdDatavasket":"30060946","publiceringsdato":"2026-09-11+02:00","cpvKode":"42000000","cpvTitel":"Industrimaskiner","formulartype":"Konkurrencevilkår","formulartypeKode":"competition","tidsfrister":["2026-10-15T21:55:00Z"],"alleOrdregivere":["Danmarks Tekniske Universitet - DTU"],"beskrivelse":"DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later than Q4 2027. We are looking for a highly versatile instrument providing stable etch recipes, capable of etching at both nanometer scale and micrometer scale with precise control of etching depth, typically a few hundreds of nm. The instrument must have state-of-the-art performance in terms of profile control, uniformity, selectivity, and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The Instrument will be installed in the DTU Nanolab cleanroom - a university facility providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse community of over 200 active users, ranging from novice students to experienced researchers, as well a high percentage of commercial clients. At DTU Nanolab there are several research groups and companies working on developing and running small scale production of optical devises on the tools. Therefor the capability of etching smooth optical waveguide, gratings and other low-roughness optical devises are of high importance to us.","bkSubTypeKode":"16","bkSubType":"Udbudsbekendtgørelse – det generelle direktiv, standardordningen","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK013"],"udforelsesstedSubLand":["Nordsjælland"],"udforelsesstedLand":["Danmark"],"udforelsesstedBy":["Kgs. Lyngby"],"tilbudsfrister":["2026-10-15T21:55:00Z"],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":["https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B="]},"opsummeringEN":{"card":{"titel":"Delivery and installation of a High ion density etcher for lithium niobate on insulator - LiNb03 (LN)","ordregiver":"Danmarks Tekniske Universitet - DTU","ordregiverId":"30060946","ordregiverIdDatavasket":"30060946","publiceringsdato":"2026-09-11+02:00","cpvKode":"42000000","cpvTitel":"Industrial machinery","formulartype":"Competition","formulartypeKode":"competition","tidsfrister":["2026-10-15T21:55:00Z"],"alleOrdregivere":["Danmarks Tekniske Universitet - DTU"],"beskrivelse":"DTU Nanolab wishes to acquire a high ion density source reactive ion etcher for etching lithium niobate on insulator 150 mm wafer processing. Delivery is expected no later than Q4 2027. We are looking for a highly versatile instrument providing stable etch recipes, capable of etching at both nanometer scale and micrometer scale with precise control of etching depth, typically a few hundreds of nm. The instrument must have state-of-the-art performance in terms of profile control, uniformity, selectivity, and in particu-lar etching sidewall smoothness to achieve low waveguide loss. The Instrument will be installed in the DTU Nanolab cleanroom - a university facility providing a comprehensive suite of micro- and nanofabrication tools. It serves a diverse community of over 200 active users, ranging from novice students to experienced researchers, as well a high percentage of commercial clients. At DTU Nanolab there are several research groups and companies working on developing and running small scale production of optical devises on the tools. Therefor the capability of etching smooth optical waveguide, gratings and other low-roughness optical devises are of high importance to us.","bkSubTypeKode":"16","bkSubType":"Contract notice – general directive, standard regime","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK013"],"udforelsesstedSubLand":["Nordsjælland"],"udforelsesstedLand":["Denmark"],"udforelsesstedBy":["Kgs. Lyngby"],"tilbudsfrister":["2026-10-15T21:55:00Z"],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":["https://eu.eu-supply.com/app/rfq/rwlentrance_s.asp?PID=459768&TID=200420236&B="]}}