{"bekendtgoerelseNoegle":{"noticeId":{"value":"654905ba-b715-48ff-af1d-63e783e6d286"},"noticeVersion":{"value":"01"},"noticePublicationNumber":{"value":"00435880-2024"}},"htmlDA":"\n\n \n
1 Køber
1.1 Køber
Officielt navn: Københavns Universitet
\n
Køberens retlige status: Offentlig virksomhed
\n
Den ordregivende myndigheds aktiviteter: Uddannelse
\n
\n
\n
2 Procedure
2.1 Procedure
Titel: Multipurpose x-Ray Diffractometer
\n
Beskrivelse: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
Identifikator for proceduren: b1a95561-6aea-41d5-bd5b-48ed552c387d
\n
Tidligere bekendtgørelse: 1eebe9de-62aa-4d83-9bbb-42d476092f06-01
\n
Intern identifikator: 043-1175/24-7000
\n
Udbudsprocedure: Udbud med forhandling uden forudgående offentliggørelse
\n
2.1.1 Formål
Kontraktens art: Varer
\n
Primær klassificering (cpv): 33111000 Røntgenapparatur
\n
\n
2.1.2 Udførelsessted
Landespecifik underafdeling (NUTS): Byen København (DK011)
\n
Land: Danmark
\n
\n
2.1.3 Værdi
Anslået værdi eksklusiv moms: 2.040.967 Dansk krone
\n
\n
2.1.4 Generelle oplysninger
Retsgrundlag:
\n
Direktiv 2014/24/EU
\n
\n
\n
\n
5 Delkontrakt
5.1 Teknisk ID for partiet: LOT-0000
Titel: Multipurpose x-Ray Diffractometer
\n
Beskrivelse: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
Intern identifikator: 043-1175/24-7000
\n
5.1.1 Formål
Kontraktens art: Varer
\n
Primær klassificering (cpv): 33111000 Røntgenapparatur
\n
Mængde: 1 
\n
\n
5.1.2 Udførelsessted
Landespecifik underafdeling (NUTS): Byen København (DK011)
\n
Land: Danmark
\n
Yderligere oplysninger: 
\n
\n
5.1.5 Værdi
Anslået værdi eksklusiv moms: 2.040.967 Dansk krone
\n
\n
5.1.6 Generelle oplysninger
Indkøbsprojekt, der ikke finansieres med EU-midler
\n
Udbuddet er omfattet af aftalen om offentlige udbud (GPA): ja
\n
\n
5.1.10 Tildelingskriterier
Kriterium:
Type: Kvalitet
\n
Navn: quality
\n
Beskrivelse: Only one supplier available
\n
Fast værdi (i alt): 1
\n
\n
\n
5.1.15 Teknikker
Rammeaftale:
Ingen rammeaftale
\n
\n
Oplysninger om det dynamiske indkøbssystem:
Intet dynamisk indkøbssystem
\n
\n
\n
5.1.16 Yderligere oplysninger, mægling og gennemgang
Organisation med ansvar for mægling: Danish Complaints Board for Public Procurement
\n
Organisation med ansvar for klager: Danish Complaints Board for Public Procurement
\n
Organisation, der leverer supplerende oplysninger om udbudsproceduren: Københavns Universitet
\n
Organisation, der sikrer adgang til udbudsdokumenterne offline: Københavns Universitet
\n
Organisation, der leverer yderligere oplysninger om klageprocedurerne: Danish Competition and Consumer Authority
\n
TED eSender: Mercell Holding ASA
\n
\n
\n
\n
6 Resultater
Værdien af alle kontrakter tildelt i denne meddelelse: 2.040.967 Dansk krone
\n
Direkte tildeling:
Begrundelse for direkte tildeling: Kontrakten kan kun tildeles af en bestemt økonomisk aktør på grund af manglende konkurrence af tekniske årsager
\n
Anden begrundelse: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
\n
6.1 Resultat delkontrakt-ID: LOT-0000
Der er udvalgt mindst én vinder.
\n
6.1.2 Oplysninger om vinderne
Vinder:
Officielt navn: Ramcon
\n
Tilbud:
\n
Tilbud – Identifikator: Ramcon Quote
\n
Identifikator for delkontrakt eller gruppe af delkontrakter: LOT-0000
\n
Underentreprise: Nej
\n
Underentrepriseværdien er kendt: nej
\n
Underentrepriseprocentdelen er kendt: nej
\n
Kontraktoplysninger:
Identifikator for kontrakten: 043-1175/24-7000
\n
Datoen for udvælgelsen af det vindende tilbud: 17-06-2024
\n
Kontrakten tildeles som led i en rammeaftale: nej
\n
\n
\n
\n
6.1.4 Statistiske oplysninger
Modtagne tilbud og ansøgninger om deltagelse:
Type modtagne indgivelser: Tilbud
Antal modtagne tilbud og ansøgninger om deltagelse: 1
\n
\n
\n
\n
\n
\n
8 Organisationer
8.1 ORG-0001
Officielt navn: Københavns Universitet
\n
Registreringsnummer: 29979812
\n
Postadresse: Nørregade 10  
\n
By: København K
\n
Postnummer: 1165
\n
Landespecifik underafdeling (NUTS): Byen København (DK011)
\n
Land: Danmark
\n
Kontaktpunkt: Bettina Petersen
\n
E-mail: bettina.dion@adm.ku.dk
\n
Telefon: +45 35327223
\n
Internetadresse: http://www.ku.dk/
\n
Køberprofil: https://eu.eu-supply.com/ctm/company/companyinformation/index/166597
\n
Denne organisations roller:
Køber
\n
Organisation, der leverer supplerende oplysninger om udbudsproceduren
\n
Organisation, der sikrer adgang til udbudsdokumenterne offline
\n
\n
\n
8.1 ORG-0002
Officielt navn: Danish Complaints Board for Public Procurement
\n
Registreringsnummer: 37795526
\n
Afdeling: 37795526
\n
By: Viborg
\n
Postnummer: 8800
\n
Landespecifik underafdeling (NUTS): Vestjylland (DK041)
\n
Land: Danmark
\n
E-mail: klfu@naevneneshus.dk
\n
Telefon: 004572405600
\n
Internetadresse: https://naevneneshus.dk/start-din-klage/klagenaevnet-for-udbud/
\n
Denne organisations roller:
Organisation med ansvar for klager
\n
Organisation med ansvar for mægling
\n
\n
\n
8.1 ORG-0003
Officielt navn: Danish Competition and Consumer Authority
\n
Registreringsnummer: 10294819
\n
By: Valby
\n
Postnummer: 2500
\n
Landespecifik underafdeling (NUTS): Byen København (DK011)
\n
Land: Danmark
\n
E-mail: kfst@kfst.dk
\n
Telefon: 0045 41715000
\n
Internetadresse: https://www.kfst.dk/
\n
Denne organisations roller:
Organisation, der leverer yderligere oplysninger om klageprocedurerne
\n
\n
\n
8.1 ORG-0004
Officielt navn: Ramcon
\n
Registreringsnummer: 12044976
\n
By: Birkerød
\n
Postnummer: 3460
\n
Landespecifik underafdeling (NUTS): Københavns omegn (DK012)
\n
Land: Danmark
\n
E-mail: ramcon@ramcon.dk
\n
Telefon: 0045 45942000
\n
Denne organisations roller:
Tilbudsgiver
\n
Vinder af disse delkontrakter: LOT-0000
\n
\n
\n
8.1 ORG-0005
Officielt navn: Mercell Holding ASA
\n
Registreringsnummer: 980921565
\n
Postadresse: Askekroken 11  
\n
By: Oslo
\n
Postnummer: 0277
\n
Landespecifik underafdeling (NUTS): Oslo (NO081)
\n
Land: Norge
\n
Kontaktpunkt: eSender
\n
E-mail: publication@mercell.com
\n
Telefon: +47 21018800
\n
Fax: +47 21018801
\n
Internetadresse: http://mercell.com/
\n
Denne organisations roller:
TED eSender
\n
\n
\n
\n
11 Oplysninger om bekendtgørelsen
11.1 Oplysninger om bekendtgørelsen
Identifikator for bekendtgørelsen: 654905ba-b715-48ff-af1d-63e783e6d286 - 01
\n
Formulartype: Resultater
\n
Bekendtgørelsestype: Bekendtgørelse om indgåede kontrakter eller koncessionstildeling – standardordningen
\n
Afsendelsesdato for bekendtgørelsen: 18-07-2024 08:31 +00:00
\n
Dato for afsendelse af bekendtgørelse (eSender): 18-07-2024 08:32 +00:00
\n
Sprog, som denne bekendtgørelse er officielt tilgængelig på: engelsk 
\n
\n
11.2 Oplysninger om offentliggørelsen
Bekendtgørelsesnummer: 00435880-2024
\n
EUT-S-nummer: 140/2024
\n
Offentliggørelsesdato: 19-07-2024
\n
\n
\n \n","htmlEN":"\n\n \n
1 Buyer
1.1 Buyer
Official name: Københavns Universitet
\n
Legal type of the buyer: Public undertaking
\n
Activity of the contracting authority: Education
\n
\n
\n
2 Procedure
2.1 Procedure
Title: Multipurpose x-Ray Diffractometer
\n
Description: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
Procedure identifier: b1a95561-6aea-41d5-bd5b-48ed552c387d
\n
Previous notice: 1eebe9de-62aa-4d83-9bbb-42d476092f06-01
\n
Internal identifier: 043-1175/24-7000
\n
Type of procedure: Negotiated without prior call for competition
\n
2.1.1 Purpose
Main nature of the contract: Supplies
\n
Main classification (cpv): 33111000 X-ray devices
\n
\n
2.1.2 Place of performance
Country subdivision (NUTS): Byen København (DK011)
\n
Country: Denmark
\n
\n
2.1.3 Value
Estimated value excluding VAT: 2.040.967 Danish krone
\n
\n
2.1.4 General information
Legal basis:
\n
Directive 2014/24/EU
\n
\n
\n
\n
5 Lot
5.1 Lot technical ID: LOT-0000
Title: Multipurpose x-Ray Diffractometer
\n
Description: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
Internal identifier: 043-1175/24-7000
\n
5.1.1 Purpose
Main nature of the contract: Supplies
\n
Main classification (cpv): 33111000 X-ray devices
\n
Quantity: 1 
\n
\n
5.1.2 Place of performance
Country subdivision (NUTS): Byen København (DK011)
\n
Country: Denmark
\n
Additional information: 
\n
\n
5.1.5 Value
Estimated value excluding VAT: 2.040.967 Danish krone
\n
\n
5.1.6 General information
Procurement Project not financed with EU Funds.
\n
The procurement is covered by the Government Procurement Agreement (GPA): yes
\n
\n
5.1.10 Award criteria
Criterion:
Type: Quality
\n
Name: quality
\n
Description: Only one supplier available
\n
Fixed value (total): 1
\n
\n
\n
5.1.15 Techniques
Framework agreement:
No framework agreement
\n
\n
Information about the dynamic purchasing system:
No dynamic purchase system
\n
\n
\n
5.1.16 Further information, mediation and review
Mediation organisation: Danish Complaints Board for Public Procurement
\n
Review organisation: Danish Complaints Board for Public Procurement
\n
Organisation providing additional information about the procurement procedure: Københavns Universitet
\n
Organisation providing offline access to the procurement documents: Københavns Universitet
\n
Organisation providing more information on the review procedures: Danish Competition and Consumer Authority
\n
TED eSender: Mercell Holding ASA
\n
\n
\n
\n
6 Results
Value of all contracts awarded in this notice: 2.040.967 Danish krone
\n
Direct award:
Justification for direct award: The contract can be provided only by a particular economic operator because of an absence of competition for technical reasons
\n
Other justification: the instrument must contain a Cu sealed tube source, cross-beam optics module for\n easy switch between Bragg-Brentano and parallel beam without the need to change optics,\n and different sample stages, including a multiple position autochanger for both reflection\n and transmission measurements at ambient conditions (with spinning function and suitable\n for various sample holders, including anoxic sample holders), a X-Y-Z sample stage\n for micro XRD mapping, a SAXS sample holder and optics set with resolution around\n 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single\n samples up to 1200 °C. The instrument must also contain a 2D detector that enables\n seamless switch between 0D, 1D and 2D detection mode depending on application type,\n equipped with differential mode to suppress sample fluorescence. Critical mandatory\n features to enable the extremely high analytical performance, ease of operation and\n multipurpose application include: 1. The supplier must guarantee a minimum goniometer\n radius of 300 mm applicable for all types of measurements, optical components and\n attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n 2. The instrument must be equipped with automatic optics and sample stage recognition\n (i.e., plug & play functionality by fully automatic, real-time component recognition),\n and automatic alignment function for all components of X-ray optics. This is of high\n importance as alignment of x-ray optics is affected by environment temperature (due\n to goniometer structural components thermal expansion), X-ray tube operation parameters\n as well as possible inaccurate handling of x-ray optical components (occurring in\n multi-user laboratories with various expertise level of users – students). Notably,\n aligned positions should be able to be restored readily even when optics are changed,\n no matter the expertise of the user. In addition, users should be able to create measurement\n flows according to their own needs. Basic functions can be combine to create users’\n own recipes for measurement or automatic maintenance. 3. The system must have easy\n switching between divergent beam for measurements in Bragg-Brentano geometry and parallel\n beam for transmission geometry formed by parabolic multilayer mirror without removal\n or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering\n and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm\n step, Length-limiting Slits: 2.0, 5.0, 10.0 mm). 5. 2D detector with minimum number\n of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching\n from 0D, 1D and 2D measurement mode with a single detector with high energy resolution.\n With capability of working in both horizontal and vertical mode. Large size of the\n detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver\n shall be equipped with attachable scattering protector on the receiving side of the\n goniometer that moves simultaneously with the detector without necessity for adjustments.\n This item on the receiving side reduces the background at low angles without a decrease\n of diffracted beam intensity, which often occurs when using a fixed knife edge. This\n solution gives extra space to sample mounting area, and simplifies sample mounting,\n is compatible with wider range of attachments and sample holders. 6. Attachment platform\n able to automatically adjust vertical (Z) position of sample in all configurations\n of diffractometer with height adjustment of 10 mm or wider allowing accommodation\n of widest possible sample sizes on the market and automatic sample surface alignment\n for all configurations and attachments. 7. Network software licence provided for unlimited\n number of installations with not less than 10 simultaneous users at once. 8. Automatic\n sample changer with reflection and transmission mode of operations, multiple samples\n of different thicknesses can be automatically aligned and measured without user intervention.\n After an extensive market research, the only supplier capable of supplying such a\n high performance and multipurpose instruments with all the required features is Rigaku\n Europe SE, supplied and serviced in Denmark via Ramcon A/S.
\n
\n
6.1 Result lot ldentifier: LOT-0000
At least one winner was chosen.
\n
6.1.2 Information about winners
Winner:
Official name: Ramcon
\n
Tender:
\n
Tender identifier: Ramcon Quote
\n
Identifier of lot or group of lots: LOT-0000
\n
Subcontracting: No
\n
Subcontracting value is known: no
\n
Subcontracting percentage is known: no
\n
Contract information:
Identifier of the contract: 043-1175/24-7000
\n
Date on which the winner was chosen: 17-06-2024
\n
The contract is awarded within a framework agreement: no
\n
\n
\n
\n
6.1.4 Statistical information
Received tenders or requests to participate:
Type of received submissions: Tenders
Number of tenders or requests to participate received: 1
\n
\n
\n
\n
\n
\n
8 Organisations
8.1 ORG-0001
Official name: Københavns Universitet
\n
Registration number: 29979812
\n
Postal address: Nørregade 10  
\n
Town: København K
\n
Postcode: 1165
\n
Country subdivision (NUTS): Byen København (DK011)
\n
Country: Denmark
\n
Contact point: Bettina Petersen
\n
Email: bettina.dion@adm.ku.dk
\n
Telephone: +45 35327223
\n
Internet address: http://www.ku.dk/
\n
Buyer profile: https://eu.eu-supply.com/ctm/company/companyinformation/index/166597
\n
Roles of this organisation:
Buyer
\n
Organisation providing additional information about the procurement procedure
\n
Organisation providing offline access to the procurement documents
\n
\n
\n
8.1 ORG-0002
Official name: Danish Complaints Board for Public Procurement
\n
Registration number: 37795526
\n
Department: 37795526
\n
Town: Viborg
\n
Postcode: 8800
\n
Country subdivision (NUTS): Vestjylland (DK041)
\n
Country: Denmark
\n
Email: klfu@naevneneshus.dk
\n
Telephone: 004572405600
\n
Internet address: https://naevneneshus.dk/start-din-klage/klagenaevnet-for-udbud/
\n
Roles of this organisation:
Review organisation
\n
Mediation organisation
\n
\n
\n
8.1 ORG-0003
Official name: Danish Competition and Consumer Authority
\n
Registration number: 10294819
\n
Town: Valby
\n
Postcode: 2500
\n
Country subdivision (NUTS): Byen København (DK011)
\n
Country: Denmark
\n
Email: kfst@kfst.dk
\n
Telephone: 0045 41715000
\n
Internet address: https://www.kfst.dk/
\n
Roles of this organisation:
Organisation providing more information on the review procedures
\n
\n
\n
8.1 ORG-0004
Official name: Ramcon
\n
Registration number: 12044976
\n
Town: Birkerød
\n
Postcode: 3460
\n
Country subdivision (NUTS): Københavns omegn (DK012)
\n
Country: Denmark
\n
Email: ramcon@ramcon.dk
\n
Telephone: 0045 45942000
\n
Roles of this organisation:
Tenderer
\n
Winner of these lots: LOT-0000
\n
\n
\n
8.1 ORG-0005
Official name: Mercell Holding ASA
\n
Registration number: 980921565
\n
Postal address: Askekroken 11  
\n
Town: Oslo
\n
Postcode: 0277
\n
Country subdivision (NUTS): Oslo (NO081)
\n
Country: Norway
\n
Contact point: eSender
\n
Email: publication@mercell.com
\n
Telephone: +47 21018800
\n
Fax: +47 21018801
\n
Internet address: http://mercell.com/
\n
Roles of this organisation:
TED eSender
\n
\n
\n
\n
11 Notice information
11.1 Notice information
Notice identifier/version: 654905ba-b715-48ff-af1d-63e783e6d286 - 01
\n
Form type: Result
\n
Notice type: Contract or concession award notice – standard regime
\n
Notice dispatch date: 18-07-2024 08:31 +00:00
\n
Notice dispatch date (eSender): 18-07-2024 08:32 +00:00
\n
Languages in which this notice is officially available: English 
\n
\n
11.2 Publication information
Notice publication number: 00435880-2024
\n
OJ S issue number: 140/2024
\n
Publication date: 19-07-2024
\n
\n
\n \n","opsummeringDA":{"card":{"titel":"Multipurpose x-Ray Diffractometer","ordregiver":"Københavns Universitet","ordregiverId":"29979812","ordregiverIdDatavasket":"29979812","publiceringsdato":"2024-07-19Z","cpvKode":"33111000","cpvTitel":"Røntgenapparatur","formulartype":"Resultater","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Københavns Universitet"],"anslaaetVaerdi":"2040967","anslaaetVaerdiValuta":"DKK","beskrivelse":"the instrument must contain a Cu sealed tube source, cross-beam optics module for easy switch between Bragg-Brentano and parallel beam without the need to change optics, and different sample stages, including a multiple position autochanger for both reflection and transmission measurements at ambient conditions (with spinning function and suitable for various sample holders, including anoxic sample holders), a X-Y-Z sample stage for micro XRD mapping, a SAXS sample holder and optics set with resolution around 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single samples up to 1200 °C. The instrument must also contain a 2D detector that enables seamless switch between 0D, 1D and 2D detection mode depending on application type, equipped with differential mode to suppress sample fluorescence. \nCritical mandatory features to enable the extremely high analytical performance, ease of operation and multipurpose application include:\n1. The supplier must guarantee a minimum goniometer radius of 300 mm applicable for all types of measurements, optical components and attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n2. The instrument must be equipped with automatic optics and sample stage recognition (i.e., plug & play functionality by fully automatic, real-time component recognition), and automatic alignment function for all components of X-ray optics. This is of high importance as alignment of x-ray optics is affected by environment temperature (due to goniometer structural components thermal expansion), X-ray tube operation parameters as well as possible inaccurate handling of x-ray optical components (occurring in multi-user laboratories with various expertise level of users – students). Notably, aligned positions should be able to be restored readily even when optics are changed, no matter the expertise of the user. In addition, users should be able to create measurement flows according to their own needs. Basic functions can be combine to create users’ own recipes for measurement or automatic maintenance.\n3. The system must have easy switching between divergent beam for measurements in Bragg-Brentano geometry and parallel beam for transmission geometry formed by parabolic multilayer mirror without removal or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm step, Length-limiting Slits: 2.0, 5.0, 10.0 mm).\n5. 2D detector with minimum number of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching from 0D, 1D and 2D measurement mode with a single detector with high energy resolution. With capability of working in both horizontal and vertical mode. Large size of the detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver shall be equipped with attachable scattering protector on the receiving side of the goniometer that moves simultaneously with the detector without necessity for adjustments. This item on the receiving side reduces the background at low angles without a decrease of diffracted beam intensity, which often occurs when using a fixed knife edge. This solution gives extra space to sample mounting area, and simplifies sample mounting, is compatible with wider range of attachments and sample holders. \n6. Attachment platform able to automatically adjust vertical (Z) position of sample in all configurations of diffractometer with height adjustment of 10 mm or wider allowing accommodation of widest possible sample sizes on the market and automatic sample surface alignment for all configurations and attachments. \n7. Network software licence provided for unlimited number of installations with not less than 10 simultaneous users at once. \n8. Automatic sample changer with reflection and transmission mode of operations, multiple samples of different thicknesses can be automatically aligned and measured without user intervention.\nAfter an extensive market research, the only supplier capable of supplying such a high performance and multipurpose instruments with all the required features is Rigaku Europe SE, supplied and serviced in Denmark via Ramcon A/S.","bkSubTypeKode":"29","bkSubType":"Bekendtgørelse om indgåede kontrakter – det generelle direktiv, standardordningen","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK011"],"udforelsesstedSubLand":["Byen København"],"udforelsesstedLand":["Danmark"],"udforelsesstedBy":[],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]},"opsummeringEN":{"card":{"titel":"Multipurpose x-Ray Diffractometer","ordregiver":"Københavns Universitet","ordregiverId":"29979812","ordregiverIdDatavasket":"29979812","publiceringsdato":"2024-07-19Z","cpvKode":"33111000","cpvTitel":"X-ray devices","formulartype":"Result","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Københavns Universitet"],"anslaaetVaerdi":"2040967","anslaaetVaerdiValuta":"DKK","beskrivelse":"the instrument must contain a Cu sealed tube source, cross-beam optics module for easy switch between Bragg-Brentano and parallel beam without the need to change optics, and different sample stages, including a multiple position autochanger for both reflection and transmission measurements at ambient conditions (with spinning function and suitable for various sample holders, including anoxic sample holders), a X-Y-Z sample stage for micro XRD mapping, a SAXS sample holder and optics set with resolution around 1-100 nm, and a non-ambient sample stage for continuous XRD measurements of single samples up to 1200 °C. The instrument must also contain a 2D detector that enables seamless switch between 0D, 1D and 2D detection mode depending on application type, equipped with differential mode to suppress sample fluorescence. \nCritical mandatory features to enable the extremely high analytical performance, ease of operation and multipurpose application include:\n1. The supplier must guarantee a minimum goniometer radius of 300 mm applicable for all types of measurements, optical components and attachments, and with a goniometer measuring range of -10 ÷ 160° (2Theta) or wider.\n2. The instrument must be equipped with automatic optics and sample stage recognition (i.e., plug & play functionality by fully automatic, real-time component recognition), and automatic alignment function for all components of X-ray optics. This is of high importance as alignment of x-ray optics is affected by environment temperature (due to goniometer structural components thermal expansion), X-ray tube operation parameters as well as possible inaccurate handling of x-ray optical components (occurring in multi-user laboratories with various expertise level of users – students). Notably, aligned positions should be able to be restored readily even when optics are changed, no matter the expertise of the user. In addition, users should be able to create measurement flows according to their own needs. Basic functions can be combine to create users’ own recipes for measurement or automatic maintenance.\n3. The system must have easy switching between divergent beam for measurements in Bragg-Brentano geometry and parallel beam for transmission geometry formed by parabolic multilayer mirror without removal or replacement of the X-ray mirror. Moreover, computer controlled incident, anti-scattering and receiving slits (Variable Incident Slit: auto-controlled 0.05 – 7.0 mm, 0.01 mm step, Length-limiting Slits: 2.0, 5.0, 10.0 mm).\n5. 2D detector with minimum number of pixels 36,500 size and active area not smaller than 365 mm2. Seamless switching from 0D, 1D and 2D measurement mode with a single detector with high energy resolution. With capability of working in both horizontal and vertical mode. Large size of the detector allows fast and snapshot mode of large 2theta ranges. The analytical receiver shall be equipped with attachable scattering protector on the receiving side of the goniometer that moves simultaneously with the detector without necessity for adjustments. This item on the receiving side reduces the background at low angles without a decrease of diffracted beam intensity, which often occurs when using a fixed knife edge. This solution gives extra space to sample mounting area, and simplifies sample mounting, is compatible with wider range of attachments and sample holders. \n6. Attachment platform able to automatically adjust vertical (Z) position of sample in all configurations of diffractometer with height adjustment of 10 mm or wider allowing accommodation of widest possible sample sizes on the market and automatic sample surface alignment for all configurations and attachments. \n7. Network software licence provided for unlimited number of installations with not less than 10 simultaneous users at once. \n8. Automatic sample changer with reflection and transmission mode of operations, multiple samples of different thicknesses can be automatically aligned and measured without user intervention.\nAfter an extensive market research, the only supplier capable of supplying such a high performance and multipurpose instruments with all the required features is Rigaku Europe SE, supplied and serviced in Denmark via Ramcon A/S.","bkSubTypeKode":"29","bkSubType":"Contract award notice – general directive, standard regime","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK011"],"udforelsesstedSubLand":["Byen København"],"udforelsesstedLand":["Denmark"],"udforelsesstedBy":[],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]}}