{"bekendtgoerelseNoegle":{"noticeId":{"value":"2d2f6c78-ed1a-4352-9ae1-13cd4aa07b87"},"noticeVersion":{"value":"01"},"noticePublicationNumber":{"value":"00434234-2025"}},"htmlDA":"\n\n \n 1 Køber1.1 KøberOfficielt navn: Danmarks Tekniske Universitet - DTU\n Køberens retlige status: Offentligretligt organ\n Den ordregivende myndigheds aktiviteter: Uddannelse\n \n \n 2 Procedure2.1 ProcedureTitel: High Quality Furnaces\n Beskrivelse: Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen\n sintering production of novel materials in basic research and technology upscaling\n projects.
Customized debinding furnace: LH 120/13 DB with Controller P570\n Chamber Furnace.
• T_max = 1300 C
• Working volume = 64 liters
• Max\n material charging weight = 120 kg
• Process gases = ambient air
• Summary:\n The customized furnace design features a robust dual shell housing with a stainless\n steel top cover and superior door frame, coated with an environment-friendly powder\n for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples,\n ensuring precise temperature measurements. The dual shell door, hinged on the right,\n boasts a longlife sealing and a removable controller for ease of use. The door's front\n is made of textured stainless steel, equipped with an espagnolette lock and an adjustable\n contact switch for secure operation.
Heating is optimized with elements arranged\n on five sides, supported by ceramic tubes for free heat radiation, and protected by\n SiC plates. The furnace also integrates a fresh air preheater for efficient debinding.\n Multilayer insulation, free from carcinogenic materials, ensures energy efficiency\n and stability, with special corner bricks and a self-supporting vaulted arch construction.
The\n automatic gas supply system, integrated into the furnace base, supports non-flammable\n gases like argon and nitrogen, with adjustable flow rates and a secure connection.\n Air management during debinding and cooling is handled by a single fan and motorized\n flap, with controlled cooling modes to maintain desired temperature gradients. The\n passive safety concept relies on fresh air injection to dilute gas emissions, ensuring\n safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable\n in height, facilitates efficient exhaust management.
Customized hydrogen\n Sintering furnace:
• T_max = 1600 C
• Working volume = 25 liters
• Max\n material charging weight = 30 kg
• Process gases = hydrogen, nitrogen, argon
•\n Summary: The furnace is designed as a universal production furnace for various applications.\n Compact designs as well as a smart arrangement of the components allow maximum functionality\n on a very comfortable footprint. The housing accommodates switchgear including transformers,\n cooling water and vacuum components with pump equipment and valves. Loading of the\n furnace and operation of the switchgear takes place on the front side. Process gas\n and cooling water gauges are operated on the side. The use of automatic valves for\n process gas and exhaust air management and the PLC control system allow the entire\n heat treatment process to be run fully automatically. The entry of all process data\n (temperatures, ramps, gas supply and vacuum) is easily controllable from the control\n panel. System status with all process related data are clearly shown on a process\n control diagram. Valves and vacuum pump can be operated manually from here as well.\n To set the furnace in a defined mode for the heat treatment cycle a preprogram will\n be done automatically with a final leak test. Therefore, the chamber will be evacuated\n and afterwards flushed with protective gas. After the heat treatment cycle is finished\n a postprogram will be started automatically. First the chamber will be filled-up with\n protective gas, then the chamber will be evacuated and afterwards filled up again\n with protective gas for a safe opening of the door.\n Identifikator for proceduren: b74ca76e-29a0-4340-8d7f-6c3933ffbc1b\n Tidligere bekendtgørelse: c91d7cbc-0a61-4713-8d20-fa38f6ed1b43-01\n Intern identifikator: 10077\n Udbudsprocedure: Udbud med forhandling uden forudgående offentliggørelse\n 2.1.1 Formål\n Primær klassificering (cpv): 42341000 Ovne til erhvervsmæssig brug\n \n 2.1.2 UdførelsesstedPostadresse: Fysikvej, Bygning 310 \n \n \n Landespecifik underafdeling (NUTS): Københavns omegn (DK012)\n \n \n 2.1.3 VærdiAnslået værdi eksklusiv moms: 355.000 Euro\n \n 2.1.4 Generelle oplysningerIndkaldelse af tilbud er afsluttet\n \n \n \n \n \n 5 Delkontrakt5.1 Teknisk ID for partiet: LOT-0000Titel: High Quality Furnaces\n Beskrivelse: Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen\n sintering production of novel materials in basic research and technology upscaling\n projects.
Customized debinding furnace: LH 120/13 DB with Controller P570\n Chamber Furnace.
• T_max = 1300 C
• Working volume = 64 liters
• Max\n material charging weight = 120 kg
• Process gases = ambient air
• Summary:\n The customized furnace design features a robust dual shell housing with a stainless\n steel top cover and superior door frame, coated with an environment-friendly powder\n for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples,\n ensuring precise temperature measurements. The dual shell door, hinged on the right,\n boasts a longlife sealing and a removable controller for ease of use. The door's front\n is made of textured stainless steel, equipped with an espagnolette lock and an adjustable\n contact switch for secure operation.
Heating is optimized with elements arranged\n on five sides, supported by ceramic tubes for free heat radiation, and protected by\n SiC plates. The furnace also integrates a fresh air preheater for efficient debinding.\n Multilayer insulation, free from carcinogenic materials, ensures energy efficiency\n and stability, with special corner bricks and a self-supporting vaulted arch construction.
The\n automatic gas supply system, integrated into the furnace base, supports non-flammable\n gases like argon and nitrogen, with adjustable flow rates and a secure connection.\n Air management during debinding and cooling is handled by a single fan and motorized\n flap, with controlled cooling modes to maintain desired temperature gradients. The\n passive safety concept relies on fresh air injection to dilute gas emissions, ensuring\n safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable\n in height, facilitates efficient exhaust management.
Customized hydrogen\n Sintering furnace:
• T_max = 1600 C
• Working volume = 25 liters
• Max\n material charging weight = 30 kg
• Process gases = hydrogen, nitrogen, argon
•\n Summary: The furnace is designed as a universal production furnace for various applications.\n Compact designs as well as a smart arrangement of the components allow maximum functionality\n on a very comfortable footprint. The housing accommodates switchgear including transformers,\n cooling water and vacuum components with pump equipment and valves. Loading of the\n furnace and operation of the switchgear takes place on the front side. Process gas\n and cooling water gauges are operated on the side. The use of automatic valves for\n process gas and exhaust air management and the PLC control system allow the entire\n heat treatment process to be run fully automatically. The entry of all process data\n (temperatures, ramps, gas supply and vacuum) is easily controllable from the control\n panel. System status with all process related data are clearly shown on a process\n control diagram. Valves and vacuum pump can be operated manually from here as well.\n To set the furnace in a defined mode for the heat treatment cycle a preprogram will\n be done automatically with a final leak test. Therefore, the chamber will be evacuated\n and afterwards flushed with protective gas. After the heat treatment cycle is finished\n a postprogram will be started automatically. First the chamber will be filled-up with\n protective gas, then the chamber will be evacuated and afterwards filled up again\n with protective gas for a safe opening of the door.\n Intern identifikator: 10077\n 5.1.1 Formål\n Primær klassificering (cpv): 42341000 Ovne til erhvervsmæssig brug\n \n 5.1.2 UdførelsesstedPostadresse: Fysikvej, Bygning 310 \n \n \n Landespecifik underafdeling (NUTS): Københavns omegn (DK012)\n \n \n \n \n 5.1.5 VærdiAnslået værdi eksklusiv moms: 355.000 Euro\n \n 5.1.6 Generelle oplysningerIndkøbsprojekt, der ikke finansieres med EU-midler\n Udbuddet er omfattet af aftalen om offentlige udbud (GPA): ja\n \n \n 5.1.10 TildelingskriterierKriterium:\n \n \n Vægtning (procentdel, præcis): 100\n \n \n 5.1.12 UdbudsvilkårOplysninger om undersøgelsesfrister: Complaint that the Contracting Authority, contrary to the Public Procurement Act,\n has concluded a contract without prior publication of a contract notice in the European\n Union Official Journal must be submitted no later than 30 calendar days from the date\n after a contract award notice has been published by the Contracting Authority in the\n European Union Official Journal and that contract award notice includes the grounds\n for the decision to award the contract directly, cf. lov om Klagenævnet for Udbud\n (Complaints Board for Tenders) § 7, section 3.
The agreement will not be\n concluded before the expiry of
10 calendar days from the day after the day on\n which this notice is published, cf. section 4(1)
(2) of the Complaints Board Act.\n \n 5.1.15 Teknikker\n Oplysninger om det dynamiske indkøbssystem:Intet dynamisk indkøbssystem\n \n \n 5.1.16 Yderligere oplysninger, mægling og gennemgangOrganisation med ansvar for klager: Klagenævnet for Udbud\n Organisation, der leverer yderligere oplysninger om klageprocedurerne: Konkurrence- og Forbrugerstyrelsen\n Organisation, hvis budget anvendes til at betale for kontrakten: Danmarks Tekniske Universitet - DTU\n Organisation, der udfører betalingen: Danmarks Tekniske Universitet - DTU\n TED eSender: Mercell Holding ASA\n \n \n \n 6 ResultaterVærdien af alle kontrakter tildelt i denne meddelelse: 355.000 Euro\n Direkte tildeling:Begrundelse for direkte tildeling: Kontrakten kan kun tildeles af en bestemt økonomisk aktør på grund af manglende konkurrence af tekniske årsager\n Anden begrundelse: DTU requires a two-step furnace system that can operate in both air and hydrogen.\n The customized furnaces designed by Nabertherm are the only supplier of a furnace\n system that supports the two-step process required by DTU for the purpose of the project\n of DTU. DTU has explored the market and concluded that no other supplier can supply\n a furnace system that supports the needs of DTU for a two-step furnace system. These\n furnaces are engineered to handle debinding in air up to 600°C, debinding in an inert\n atmosphere with an optional gas box up to 600°C, and sintering in air up to 1250°C.\n This versatility ensures that we can efficiently manage various stages of our production\n process within a single system.
The debinding system is optimized for slow\n vaporization processes, which is crucial for maintaining the integrity of our products.\n Fresh air is purged into the furnace chamber during debinding to effectively remove\n exhausts, ensuring a clean and controlled environment. The system's maximum vaporization\n rate of 10 g/min and permissible organic quantity of 1500 g/charge are designed to\n prevent overloading and ensure safe operation. Should these limits be exceeded, the\n system allows for adjustments to the firing curve or reduction in charge amount, providing\n flexibility and control.
Key parameters such as binder composition, organic\n content, product geometry, and evaporation duration are critical for the dynamics\n of evaporation. The furnaces are designed to accommodate these variables, ensuring\n that the debinding system operates within safe limits. Additionally, the heating and\n cooling speeds are adjustable based on the material, geometry, and weight of the charge,\n allowing us to optimize the process for different products.\n \n 6.1 Resultat delkontrakt-ID: LOT-0000Der er udvalgt mindst én vinder.\n 6.1.2 Oplysninger om vinderneVinder:Officielt navn: Nabertherm GmbH\n \n Tilbud – Identifikator: Tilbud\n Identifikator for delkontrakt eller gruppe af delkontrakter: LOT-0000\n Værdien af resultatet: 355.000 Euro\n Underentrepriseværdien er kendt: nej\n Underentrepriseprocentdelen er kendt: nej\n Kontraktoplysninger:Identifikator for kontrakten: Tilbud\n Datoen for udvælgelsen af det vindende tilbud: 22-05-2025\n Dato for indgåelse af kontrakten: 02-07-2025\n Kontrakten tildeles som led i en rammeaftale: nej\n \n \n \n 6.1.4 Statistiske oplysningerModtagne tilbud og ansøgninger om deltagelse:Type modtagne indgivelser: TilbudAntal modtagne tilbud og ansøgninger om deltagelse: 1\n \n \n \n \n \n 8 Organisationer8.1 ORG-0001Officielt navn: Danmarks Tekniske Universitet - DTU\n Registreringsnummer: 30060946\n Postadresse: Anker Engelunds Vej 1 \n \n \n Landespecifik underafdeling (NUTS): Københavns omegn (DK012)\n \n Kontaktpunkt: Anna Storch\n \n \n Internetadresse: https://www.dtu.dk\n Køberprofil: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863\n Denne organisations roller:\n Organisation, hvis budget anvendes til at betale for kontrakten\n Organisation, der udfører betalingen\n \n \n 8.1 ORG-0002Officielt navn: Klagenævnet for Udbud\n Registreringsnummer: 37795526\n Postadresse: Nævnenes hus, Toldboden 2 \n \n \n Landespecifik underafdeling (NUTS): Østjylland (DK042)\n \n \n \n Internetadresse: http://www.klfu.dk\n Denne organisations roller:Organisation med ansvar for klager\n \n \n 8.1 ORG-0003Officielt navn: Konkurrence- og Forbrugerstyrelsen\n Registreringsnummer: 10294819\n Postadresse: Carl Jacobsens Vej 35 \n \n \n Landespecifik underafdeling (NUTS): Byen København (DK011)\n \n \n \n Internetadresse: http://www.kfst.dk\n Denne organisations roller:Organisation, der leverer yderligere oplysninger om klageprocedurerne\n \n \n 8.1 ORG-0004Officielt navn: Nabertherm GmbH\n Registreringsnummer: DE813108298\n Postadresse: Bahnhofstrasse 20 \n \n \n Landespecifik underafdeling (NUTS): Bremen, Kreisfreie Stadt (DE501)\n \n Kontaktpunkt: Nils Kloppenburg\n E-mail: nils.kloppenburg@nabertherm.de\n \n Denne organisations roller:\n Vinder af disse delkontrakter: LOT-0000\n \n \n 8.1 ORG-0005Officielt navn: Mercell Holding ASA\n Registreringsnummer: 980921565\n Postadresse: Askekroken 11 \n \n \n Landespecifik underafdeling (NUTS): Oslo (NO081)\n \n \n E-mail: publication@mercell.com\n \n \n Internetadresse: http://mercell.com/\n Denne organisations roller:\n \n \n \n 11 Oplysninger om bekendtgørelsen11.1 Oplysninger om bekendtgørelsenIdentifikator for bekendtgørelsen: 2d2f6c78-ed1a-4352-9ae1-13cd4aa07b87 - 01\n \n Bekendtgørelsestype: Bekendtgørelse om indgåede kontrakter eller koncessionstildeling – standardordningen\n Afsendelsesdato for bekendtgørelsen: 02-07-2025 08:12 +00:00\n Dato for afsendelse af bekendtgørelse (eSender): 02-07-2025 13:00 +00:00\n Sprog, som denne bekendtgørelse er officielt tilgængelig på: engelsk \n \n 11.2 Oplysninger om offentliggørelsenBekendtgørelsesnummer: 00434234-2025\n \n Offentliggørelsesdato: 04-07-2025\n \n \n \n","htmlEN":"\n\n \n 1 Buyer1.1 BuyerOfficial name: Danmarks Tekniske Universitet - DTU\n Legal type of the buyer: Body governed by public law\n Activity of the contracting authority: Education\n \n \n 2 Procedure2.1 ProcedureTitle: High Quality Furnaces\n Description: Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen\n sintering production of novel materials in basic research and technology upscaling\n projects.
Customized debinding furnace: LH 120/13 DB with Controller P570\n Chamber Furnace.
• T_max = 1300 C
• Working volume = 64 liters
• Max\n material charging weight = 120 kg
• Process gases = ambient air
• Summary:\n The customized furnace design features a robust dual shell housing with a stainless\n steel top cover and superior door frame, coated with an environment-friendly powder\n for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples,\n ensuring precise temperature measurements. The dual shell door, hinged on the right,\n boasts a longlife sealing and a removable controller for ease of use. The door's front\n is made of textured stainless steel, equipped with an espagnolette lock and an adjustable\n contact switch for secure operation.
Heating is optimized with elements arranged\n on five sides, supported by ceramic tubes for free heat radiation, and protected by\n SiC plates. The furnace also integrates a fresh air preheater for efficient debinding.\n Multilayer insulation, free from carcinogenic materials, ensures energy efficiency\n and stability, with special corner bricks and a self-supporting vaulted arch construction.
The\n automatic gas supply system, integrated into the furnace base, supports non-flammable\n gases like argon and nitrogen, with adjustable flow rates and a secure connection.\n Air management during debinding and cooling is handled by a single fan and motorized\n flap, with controlled cooling modes to maintain desired temperature gradients. The\n passive safety concept relies on fresh air injection to dilute gas emissions, ensuring\n safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable\n in height, facilitates efficient exhaust management.
Customized hydrogen\n Sintering furnace:
• T_max = 1600 C
• Working volume = 25 liters
• Max\n material charging weight = 30 kg
• Process gases = hydrogen, nitrogen, argon
•\n Summary: The furnace is designed as a universal production furnace for various applications.\n Compact designs as well as a smart arrangement of the components allow maximum functionality\n on a very comfortable footprint. The housing accommodates switchgear including transformers,\n cooling water and vacuum components with pump equipment and valves. Loading of the\n furnace and operation of the switchgear takes place on the front side. Process gas\n and cooling water gauges are operated on the side. The use of automatic valves for\n process gas and exhaust air management and the PLC control system allow the entire\n heat treatment process to be run fully automatically. The entry of all process data\n (temperatures, ramps, gas supply and vacuum) is easily controllable from the control\n panel. System status with all process related data are clearly shown on a process\n control diagram. Valves and vacuum pump can be operated manually from here as well.\n To set the furnace in a defined mode for the heat treatment cycle a preprogram will\n be done automatically with a final leak test. Therefore, the chamber will be evacuated\n and afterwards flushed with protective gas. After the heat treatment cycle is finished\n a postprogram will be started automatically. First the chamber will be filled-up with\n protective gas, then the chamber will be evacuated and afterwards filled up again\n with protective gas for a safe opening of the door.\n Procedure identifier: b74ca76e-29a0-4340-8d7f-6c3933ffbc1b\n Previous notice: c91d7cbc-0a61-4713-8d20-fa38f6ed1b43-01\n Internal identifier: 10077\n Type of procedure: Negotiated without prior call for competition\n 2.1.1 PurposeMain nature of the contract: Supplies\n Main classification (cpv): 42341000 Commercial ovens\n \n 2.1.2 Place of performancePostal address: Fysikvej, Bygning 310 \n \n \n Country subdivision (NUTS): Københavns omegn (DK012)\n \n \n 2.1.3 ValueEstimated value excluding VAT: 355.000 Euro\n \n 2.1.4 General informationCall for competition is terminated\n \n \n \n \n \n 5 Lot5.1 Lot technical ID: LOT-0000Title: High Quality Furnaces\n Description: Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen\n sintering production of novel materials in basic research and technology upscaling\n projects.
Customized debinding furnace: LH 120/13 DB with Controller P570\n Chamber Furnace.
• T_max = 1300 C
• Working volume = 64 liters
• Max\n material charging weight = 120 kg
• Process gases = ambient air
• Summary:\n The customized furnace design features a robust dual shell housing with a stainless\n steel top cover and superior door frame, coated with an environment-friendly powder\n for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples,\n ensuring precise temperature measurements. The dual shell door, hinged on the right,\n boasts a longlife sealing and a removable controller for ease of use. The door's front\n is made of textured stainless steel, equipped with an espagnolette lock and an adjustable\n contact switch for secure operation.
Heating is optimized with elements arranged\n on five sides, supported by ceramic tubes for free heat radiation, and protected by\n SiC plates. The furnace also integrates a fresh air preheater for efficient debinding.\n Multilayer insulation, free from carcinogenic materials, ensures energy efficiency\n and stability, with special corner bricks and a self-supporting vaulted arch construction.
The\n automatic gas supply system, integrated into the furnace base, supports non-flammable\n gases like argon and nitrogen, with adjustable flow rates and a secure connection.\n Air management during debinding and cooling is handled by a single fan and motorized\n flap, with controlled cooling modes to maintain desired temperature gradients. The\n passive safety concept relies on fresh air injection to dilute gas emissions, ensuring\n safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable\n in height, facilitates efficient exhaust management.
Customized hydrogen\n Sintering furnace:
• T_max = 1600 C
• Working volume = 25 liters
• Max\n material charging weight = 30 kg
• Process gases = hydrogen, nitrogen, argon
•\n Summary: The furnace is designed as a universal production furnace for various applications.\n Compact designs as well as a smart arrangement of the components allow maximum functionality\n on a very comfortable footprint. The housing accommodates switchgear including transformers,\n cooling water and vacuum components with pump equipment and valves. Loading of the\n furnace and operation of the switchgear takes place on the front side. Process gas\n and cooling water gauges are operated on the side. The use of automatic valves for\n process gas and exhaust air management and the PLC control system allow the entire\n heat treatment process to be run fully automatically. The entry of all process data\n (temperatures, ramps, gas supply and vacuum) is easily controllable from the control\n panel. System status with all process related data are clearly shown on a process\n control diagram. Valves and vacuum pump can be operated manually from here as well.\n To set the furnace in a defined mode for the heat treatment cycle a preprogram will\n be done automatically with a final leak test. Therefore, the chamber will be evacuated\n and afterwards flushed with protective gas. After the heat treatment cycle is finished\n a postprogram will be started automatically. First the chamber will be filled-up with\n protective gas, then the chamber will be evacuated and afterwards filled up again\n with protective gas for a safe opening of the door.\n Internal identifier: 10077\n 5.1.1 PurposeMain nature of the contract: Supplies\n Main classification (cpv): 42341000 Commercial ovens\n \n 5.1.2 Place of performancePostal address: Fysikvej, Bygning 310 \n \n \n Country subdivision (NUTS): Københavns omegn (DK012)\n \n \n \n 5.1.3 Estimated duration\n \n 5.1.5 ValueEstimated value excluding VAT: 355.000 Euro\n \n 5.1.6 General informationProcurement Project not financed with EU Funds.\n The procurement is covered by the Government Procurement Agreement (GPA): yes\n \n 5.1.7 Strategic procurement\n 5.1.10 Award criteriaCriterion:\n \n \n Weight (percentage, exact): 100\n \n \n 5.1.12 Terms of procurementInformation about review deadlines: Complaint that the Contracting Authority, contrary to the Public Procurement Act,\n has concluded a contract without prior publication of a contract notice in the European\n Union Official Journal must be submitted no later than 30 calendar days from the date\n after a contract award notice has been published by the Contracting Authority in the\n European Union Official Journal and that contract award notice includes the grounds\n for the decision to award the contract directly, cf. lov om Klagenævnet for Udbud\n (Complaints Board for Tenders) § 7, section 3.
The agreement will not be\n concluded before the expiry of
10 calendar days from the day after the day on\n which this notice is published, cf. section 4(1)
(2) of the Complaints Board Act.\n \n 5.1.15 Techniques\n Information about the dynamic purchasing system:No dynamic purchase system\n \n \n 5.1.16 Further information, mediation and reviewReview organisation: Klagenævnet for Udbud\n Organisation providing more information on the review procedures: Konkurrence- og Forbrugerstyrelsen\n Organisation whose budget is used to pay for the contract: Danmarks Tekniske Universitet - DTU\n Organisation executing the payment: Danmarks Tekniske Universitet - DTU\n TED eSender: Mercell Holding ASA\n \n \n \n 6 ResultsValue of all contracts awarded in this notice: 355.000 Euro\n Direct award:Justification for direct award: The contract can be provided only by a particular economic operator because of an absence of competition for technical reasons\n Other justification: DTU requires a two-step furnace system that can operate in both air and hydrogen.\n The customized furnaces designed by Nabertherm are the only supplier of a furnace\n system that supports the two-step process required by DTU for the purpose of the project\n of DTU. DTU has explored the market and concluded that no other supplier can supply\n a furnace system that supports the needs of DTU for a two-step furnace system. These\n furnaces are engineered to handle debinding in air up to 600°C, debinding in an inert\n atmosphere with an optional gas box up to 600°C, and sintering in air up to 1250°C.\n This versatility ensures that we can efficiently manage various stages of our production\n process within a single system.
The debinding system is optimized for slow\n vaporization processes, which is crucial for maintaining the integrity of our products.\n Fresh air is purged into the furnace chamber during debinding to effectively remove\n exhausts, ensuring a clean and controlled environment. The system's maximum vaporization\n rate of 10 g/min and permissible organic quantity of 1500 g/charge are designed to\n prevent overloading and ensure safe operation. Should these limits be exceeded, the\n system allows for adjustments to the firing curve or reduction in charge amount, providing\n flexibility and control.
Key parameters such as binder composition, organic\n content, product geometry, and evaporation duration are critical for the dynamics\n of evaporation. The furnaces are designed to accommodate these variables, ensuring\n that the debinding system operates within safe limits. Additionally, the heating and\n cooling speeds are adjustable based on the material, geometry, and weight of the charge,\n allowing us to optimize the process for different products.\n \n 6.1 Result lot ldentifier: LOT-0000At least one winner was chosen.\n 6.1.2 Information about winnersWinner:Official name: Nabertherm GmbH\n \n Tender identifier: Tilbud\n Identifier of lot or group of lots: LOT-0000\n Value of the result: 355.000 Euro\n Subcontracting value is known: no\n Subcontracting percentage is known: no\n Contract information:Identifier of the contract: Tilbud\n Date on which the winner was chosen: 22-05-2025\n Date of the conclusion of the contract: 02-07-2025\n The contract is awarded within a framework agreement: no\n \n \n \n 6.1.4 Statistical informationReceived tenders or requests to participate:Type of received submissions: TendersNumber of tenders or requests to participate received: 1\n \n \n \n \n \n 8 Organisations8.1 ORG-0001Official name: Danmarks Tekniske Universitet - DTU\n Registration number: 30060946\n Postal address: Anker Engelunds Vej 1 \n \n \n Country subdivision (NUTS): Københavns omegn (DK012)\n \n Contact point: Anna Storch\n \n \n Internet address: https://www.dtu.dk\n Buyer profile: https://eu.eu-supply.com/ctm/company/companyinformation/index/165863\n Roles of this organisation:\n Organisation whose budget is used to pay for the contract\n Organisation executing the payment\n \n \n 8.1 ORG-0002Official name: Klagenævnet for Udbud\n Registration number: 37795526\n Postal address: Nævnenes hus, Toldboden 2 \n \n \n Country subdivision (NUTS): Østjylland (DK042)\n \n \n \n Internet address: http://www.klfu.dk\n Roles of this organisation:\n \n \n 8.1 ORG-0003Official name: Konkurrence- og Forbrugerstyrelsen\n Registration number: 10294819\n Postal address: Carl Jacobsens Vej 35 \n \n \n Country subdivision (NUTS): Byen København (DK011)\n \n \n \n Internet address: http://www.kfst.dk\n Roles of this organisation:Organisation providing more information on the review procedures\n \n \n 8.1 ORG-0004Official name: Nabertherm GmbH\n Registration number: DE813108298\n Postal address: Bahnhofstrasse 20 \n \n \n Country subdivision (NUTS): Bremen, Kreisfreie Stadt (DE501)\n \n Contact point: Nils Kloppenburg\n Email: nils.kloppenburg@nabertherm.de\n \n Roles of this organisation:\n Winner of these lots: LOT-0000\n \n \n 8.1 ORG-0005Official name: Mercell Holding ASA\n Registration number: 980921565\n Postal address: Askekroken 11 \n \n \n Country subdivision (NUTS): Oslo (NO081)\n \n \n Email: publication@mercell.com\n \n \n Internet address: http://mercell.com/\n Roles of this organisation:\n \n \n \n 11 Notice information11.1 Notice informationNotice identifier/version: 2d2f6c78-ed1a-4352-9ae1-13cd4aa07b87 - 01\n \n Notice type: Contract or concession award notice – standard regime\n Notice dispatch date: 02-07-2025 08:12 +00:00\n Notice dispatch date (eSender): 02-07-2025 13:00 +00:00\n Languages in which this notice is officially available: English \n \n 11.2 Publication informationNotice publication number: 00434234-2025\n OJ S issue number: 126/2025\n Publication date: 04-07-2025\n \n \n \n","opsummeringDA":{"card":{"titel":"High Quality Furnaces","ordregiver":"Danmarks Tekniske Universitet - DTU","ordregiverId":"30060946","ordregiverIdDatavasket":"30060946","publiceringsdato":"2025-07-04+02:00","cpvKode":"42341000","cpvTitel":"Ovne til erhvervsmæssig brug","formulartype":"Resultater","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Danmarks Tekniske Universitet - DTU"],"anslaaetVaerdi":"355000","anslaaetVaerdiValuta":"EUR","beskrivelse":"Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen sintering production of novel materials in basic research and technology upscaling projects.\n\nCustomized debinding furnace: LH 120/13 DB with Controller P570 Chamber Furnace. \n• T_max = 1300 C\n• Working volume = 64 liters\n• Max material charging weight = 120 kg\n• Process gases = ambient air\n• Summary: The customized furnace design features a robust dual shell housing with a stainless steel top cover and superior door frame, coated with an environment-friendly powder for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples, ensuring precise temperature measurements. The dual shell door, hinged on the right, boasts a longlife sealing and a removable controller for ease of use. The door's front is made of textured stainless steel, equipped with an espagnolette lock and an adjustable contact switch for secure operation.\nHeating is optimized with elements arranged on five sides, supported by ceramic tubes for free heat radiation, and protected by SiC plates. The furnace also integrates a fresh air preheater for efficient debinding. Multilayer insulation, free from carcinogenic materials, ensures energy efficiency and stability, with special corner bricks and a self-supporting vaulted arch construction.\nThe automatic gas supply system, integrated into the furnace base, supports non-flammable gases like argon and nitrogen, with adjustable flow rates and a secure connection. Air management during debinding and cooling is handled by a single fan and motorized flap, with controlled cooling modes to maintain desired temperature gradients. The passive safety concept relies on fresh air injection to dilute gas emissions, ensuring safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable in height, facilitates efficient exhaust management.\n\nCustomized hydrogen Sintering furnace:\n • T_max = 1600 C\n• Working volume = 25 liters\n• Max material charging weight = 30 kg\n• Process gases = hydrogen, nitrogen, argon\n• Summary: The furnace is designed as a universal production furnace for various applications. Compact designs as well as a smart arrangement of the components allow maximum functionality on a very comfortable footprint. The housing accommodates switchgear including transformers, cooling water and vacuum components with pump equipment and valves. Loading of the furnace and operation of the switchgear takes place on the front side. Process gas and cooling water gauges are operated on the side. The use of automatic valves for process gas and exhaust air management and the PLC control system allow the entire heat treatment process to be run fully automatically. The entry of all process data (temperatures, ramps, gas supply and vacuum) is easily controllable from the control panel. System status with all process related data are clearly shown on a process control diagram. Valves and vacuum pump can be operated manually from here as well. To set the furnace in a defined mode for the heat treatment cycle a preprogram will be done automatically with a final leak test. Therefore, the chamber will be evacuated and afterwards flushed with protective gas. After the heat treatment cycle is finished a postprogram will be started automatically. First the chamber will be filled-up with protective gas, then the chamber will be evacuated and afterwards filled up again with protective gas for a safe opening of the door.","bkSubTypeKode":"29","bkSubType":"Bekendtgørelse om indgåede kontrakter – det generelle direktiv, standardordningen","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK012"],"udforelsesstedSubLand":["Københavns omegn"],"udforelsesstedLand":["Danmark"],"udforelsesstedBy":["Lyngby"],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]},"opsummeringEN":{"card":{"titel":"High Quality Furnaces","ordregiver":"Danmarks Tekniske Universitet - DTU","ordregiverId":"30060946","ordregiverIdDatavasket":"30060946","publiceringsdato":"2025-07-04+02:00","cpvKode":"42341000","cpvTitel":"Commercial ovens","formulartype":"Result","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Danmarks Tekniske Universitet - DTU"],"anslaaetVaerdi":"355000","anslaaetVaerdiValuta":"EUR","beskrivelse":"Large-capacity, high-temperature, customized chamber furnaces for debinding and hydrogen sintering production of novel materials in basic research and technology upscaling projects.\n\nCustomized debinding furnace: LH 120/13 DB with Controller P570 Chamber Furnace. \n• T_max = 1300 C\n• Working volume = 64 liters\n• Max material charging weight = 120 kg\n• Process gases = ambient air\n• Summary: The customized furnace design features a robust dual shell housing with a stainless steel top cover and superior door frame, coated with an environment-friendly powder for durability. It includes a welded base frame and an 18 mm port for inserting thermocouples, ensuring precise temperature measurements. The dual shell door, hinged on the right, boasts a longlife sealing and a removable controller for ease of use. The door's front is made of textured stainless steel, equipped with an espagnolette lock and an adjustable contact switch for secure operation.\nHeating is optimized with elements arranged on five sides, supported by ceramic tubes for free heat radiation, and protected by SiC plates. The furnace also integrates a fresh air preheater for efficient debinding. Multilayer insulation, free from carcinogenic materials, ensures energy efficiency and stability, with special corner bricks and a self-supporting vaulted arch construction.\nThe automatic gas supply system, integrated into the furnace base, supports non-flammable gases like argon and nitrogen, with adjustable flow rates and a secure connection. Air management during debinding and cooling is handled by a single fan and motorized flap, with controlled cooling modes to maintain desired temperature gradients. The passive safety concept relies on fresh air injection to dilute gas emissions, ensuring safe operation under positive pressure. Finally, a stainless steel exhaust hood, adjustable in height, facilitates efficient exhaust management.\n\nCustomized hydrogen Sintering furnace:\n • T_max = 1600 C\n• Working volume = 25 liters\n• Max material charging weight = 30 kg\n• Process gases = hydrogen, nitrogen, argon\n• Summary: The furnace is designed as a universal production furnace for various applications. Compact designs as well as a smart arrangement of the components allow maximum functionality on a very comfortable footprint. The housing accommodates switchgear including transformers, cooling water and vacuum components with pump equipment and valves. Loading of the furnace and operation of the switchgear takes place on the front side. Process gas and cooling water gauges are operated on the side. The use of automatic valves for process gas and exhaust air management and the PLC control system allow the entire heat treatment process to be run fully automatically. The entry of all process data (temperatures, ramps, gas supply and vacuum) is easily controllable from the control panel. System status with all process related data are clearly shown on a process control diagram. Valves and vacuum pump can be operated manually from here as well. To set the furnace in a defined mode for the heat treatment cycle a preprogram will be done automatically with a final leak test. Therefore, the chamber will be evacuated and afterwards flushed with protective gas. After the heat treatment cycle is finished a postprogram will be started automatically. First the chamber will be filled-up with protective gas, then the chamber will be evacuated and afterwards filled up again with protective gas for a safe opening of the door.","bkSubTypeKode":"29","bkSubType":"Contract award notice – general directive, standard regime","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":["DK012"],"udforelsesstedSubLand":["Københavns omegn"],"udforelsesstedLand":["Denmark"],"udforelsesstedBy":["Lyngby"],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]}}