{"bekendtgoerelseNoegle":{"noticeId":{"value":"26cc90b2-a925-4b3f-8d35-a409d2295196"},"noticeVersion":{"value":"01"},"noticePublicationNumber":{"value":"00530005-2025"}},"htmlDA":"\n\n \n 1 Køber1.1 KøberOfficielt navn: Syddansk Universitet\n Køberens retlige status: Offentligretligt organ\n Den ordregivende myndigheds aktivitet: Uddannelse\n \n \n 2 Procedure2.1 ProcedureTitel: Metal 3D printer for SDU\n Beskrivelse: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2. Technology patents:\n Specifically, the ProHeat, electron gun (which provides high beam powerfor a small\n beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies.\n The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU\n towards printing specific lower-conductive alloys. The well-known smoking issues of\n EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely\n addressesthis. These are key differentiators that set Freemelt apart from the competition.\n The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent),\n JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1\n – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN
3. Spot melting: SDU wants to\n alternate the scanning strategies with full control, i.e. not onlychanging the stripe\n pattern, but allowing for the transition to point scanning with completefunctionalization\n of the pattern. The PixelMelt feature of Freemelt supports this uniquely.
4.\n In-situ monitoring: SDU expects to integrate monitoring features (cameras, pyrometers,\n etc.)directly into the hardware, and the integration-ready state of the Freemelt product,\n with its rangeof dedicated ports, is a strong asset.\n Identifikator for proceduren: c3e7b251-37fe-4154-94fd-f3d5ab01372e\n Tidligere bekendtgørelse: 444248-2025\n \n Udbudsprocedure: Udbud med forhandling uden forudgående offentliggørelse\n 2.1.1 FormålKontraktens hovedformål: Varer\n Primær klassifikation (cpv): 42600000 Værktøjsmaskiner\n Supplerende klassifikation (cpv): 42990000 Diverse specialmaskiner\n Supplerende klassifikation (cpv): 43800000 Værkstedsudstyr\n \n \n 2.1.4 Generelle oplysninger\n \n Gældende lovgivning på tværs af grænserne: Public Procurement Act Section 80, litra 3 and 4 - Only one supplier:
Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical
specifications.\n There is an objective and proportionate reason for the establishment of specifications\n which result in there being only one supplier. The possibility that there are other\n potential suppliers who could deliver the same has been objectively excluded by market\n consultations.\n \n \n \n 5 Delkontrakt5.1 Teknisk ID for delkontrakten: LOT-0000Titel: Metal 3D printer for SDU\n Beskrivelse: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2.
Technology\n patents: Specifically, the ProHeat, electron gun (which provides high beam powerfor\n a small beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies.\n The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU\n towards printing specific lower-conductive alloys. The well-known smoking issues of\n EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely\n addressesthis. These are key differentiators that set Freemelt apart from the competition.\n The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent),\n JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1\n – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN
3.
Spot melting: SDU\n wants to alternate the scanning strategies with full control, i.e. not onlychanging\n the stripe pattern, but allowing for the transition to point scanning with completefunctionalization\n of the pattern. The PixelMelt feature of Freemelt supports this uniquely.
4.\n
In-situ monitoring: SDU expects to integrate monitoring features (cameras,\n pyrometers, etc.)directly into the hardware, and the integration-ready state of the\n Freemelt product, with its rangeof dedicated ports, is a strong asset.\n \n 5.1.1 FormålKontraktens hovedformål: Varer\n Primær klassifikation (cpv): 42600000 Værktøjsmaskiner\n Supplerende klassifikation (cpv): 42990000 Diverse specialmaskiner\n Supplerende klassifikation (cpv): 43800000 Værkstedsudstyr\n \n 5.1.2 Udførelsessted\n \n \n 5.1.3 Anslået varighed\n \n \n 5.1.4 FornyelseHøjeste antal fornyelser: 0\n \n 5.1.6 Generelle oplysningerIndkøbsprojekt, der ikke finansieres med EU-midler\n Udbuddet er omfattet af aftalen om offentlige udbud (GPA): ja\n Yderligere oplysninger: Public Procurement Act Section 80, litra 3 and 4 - Only one supplier:
Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical
specifications.\n There is an objective and proportionate reason for the establishment of specifications\n which result in there being only one supplier. The possibility that there are other\n potential suppliers who could deliver the same has been objectively excluded by market\n consultations.\n \n 5.1.10 TildelingskriterierKriterium:\n Beskrivelse: Public Procurement Act Section 80, litra 3 and 4 - Only one
supplier: Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical specifications. There\n is an objective and proportionate reason for the establishment of specifications which\n result in there being only one supplier. The possibility that there are other potential\n suppliers who could deliver the same has been objectively excluded by market consultations.
The\n contract can be provided only by a particular economic operator because of an absence\n
of competition for technical reasons\n Kategori for tildelingskriteriet tærskel: Vægtning (procentdel, præcis)Tildelingskriterium talværdi: 100\n \n \n \n 5.1.15 Teknikker\n Oplysninger om det dynamiske indkøbssystem:Intet dynamisk indkøbssystem\n \n \n 5.1.16 Yderligere oplysninger, mægling og gennemgangOrganisation med ansvar for klager: Klagenævnet for Udbud\n Oplysninger om klagefrister: I henhold til lov om Klagenævnet for Udbud m.v. (loven kan hentes på www.retsinformation.dk),\n gælder følgende frister for indgivelse af klage:
Klage over ikke at være blevet\n udvalgt skal være indgivet til Klagenævnet for Udbud inden 20 kalenderdage, jf.lovens\n § 7, stk. 1, fra dagen efter afsendelse af en underretning til de berørte ansøgere\n om, hvem der er blevet udvalgt, når underretningen er ledsaget af en begrundelse for\n beslutningen i overensstemmelse med lovens §2, stk. 1, nr. 1, og udbudslovens § 171,\n stk. 2.
I andre situationer skal klage over udbud, jf.lovens § 7, stk. 2, være\n indgivet til Klagenævnet for Udbud inden:
1) 45 kalenderdage efter at ordregiveren\n har offentliggjort en bekendtgørelse i Den Europæiske Unions Tidende om, at ordregiveren\n har indgået en kontrakt.Fristen regnes fra dagen efter den dag, hvor bekendtgørelsen\n er blevet offentliggjort.
2) 20 kalenderdage regnet fra dagen efter at ordregiveren\n har meddelt sin beslutning, jf.udbudslovens § 185, stk. 2.
Senest samtidig med\n at en klage indgives til Klagenævnet for Udbud, skal klageren skriftligt underrette\n ordregiveren om, at klage indgives til Klagenævnet for Udbud, og om hvorvidt klagen\n er indgivet i standstill - perioden, jf.lovens § 6, stk. 4.I tilfælde hvor klagen\n ikke er indgivet i standstill - perioden, skal klageren tillige angive, hvorvidt der\n begæres opsættende virkning af klagen, jf.lovens § 12, stk. 1.
Klagenævnet for\n Udbuds e-mailadresse er angivet i punkt VI.4.1).
Klagenævnet for Udbuds klagevejledning\n kan findes på: www.erhvervsstyrelsen.dk.\n Organisation, der leverer supplerende oplysninger om udbudsproceduren: Syddansk Universitet\n Organisation, der leverer yderligere oplysninger om klageprocedurerne: Konkurrence- og Forbrugerstyrelsen\n \n \n \n 6 ResultaterVærdien af alle kontrakter tildelt i denne bekendtgørelse: 2.496.268,66 Dansk krone\n Direkte tildeling:Begrundelse for direkte tildeling: Kontrakten kan kun tildeles af en bestemt økonomisk aktør på grund af manglende konkurrence af tekniske årsager\n Anden begrundelse: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2.Technology patents: Specifically,\n the ProHeat, electron gun (which provides high beam powerfor a small beam size, crucial\n for high productivity with tungsten), and spot preheatingtechnologies. The ProHeat\n feature is unique to Freemelt, and it is a mandatory requirement forSDU towards printing\n specific lower-conductive alloys. The well-known smoking issues of EB-PBF constitute\n a mandatory issue to be avoided for SDU, and the ProHeat uniquely addressesthis. These\n are key differentiators that set Freemelt apart from the competition. The relevantpatents\n are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent), JP7384366B2\n – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1 – BUILD COMPARTMENT\n WITH SELF-SEALINGDESIGN
3.Spot melting: SDU wants to alternate the scanning strategies\n with full control, i.e. not onlychanging the stripe pattern, but allowing for the\n transition to point scanning with completefunctionalization of the pattern. The PixelMelt\n feature of Freemelt supports this uniquely.
4.In-situ monitoring: SDU expects\n to integrate monitoring features (cameras, pyrometers, etc.)directly into the hardware,\n and the integration-ready state of the Freemelt product, with its rangeof dedicated\n ports, is a strong asset.\n \n 6.1 Resultat delkontrakt-ID: LOT-0000Der er udvalgt mindst én vinder.\n 6.1.2 Oplysninger om vinderneVinder:Officielt navn: Freemelt AB,\n \n Tilbud – Identifikator: 96606\n ID for delkontrakt eller gruppe af delkontrakter: LOT-0000\n Værdien af tilbuddet: 2.496.268,66 Dansk krone\n \n Kontraktoplysninger:Identifikator for kontrakten: 96606\n Titel: Metal 3D printer for SDU / Freemelt AB,\n Datoen for udvælgelsen af det vindende tilbud: 01-07-2025\n Dato for indgåelse af kontrakten: 23-07-2025\n \n \n \n 6.1.4 Statistiske oplysningerModtagne tilbud og ansøgninger om deltagelse:Type modtagne indgivelser: TilbudAntal modtagne tilbud og ansøgninger om deltagelse: 0\n \n \n \n \n \n 8 Organisationer8.1 ORG-0001Officielt navn: Syddansk Universitet\n Registreringsnummer: 29283958\n Postadresse: Campusvej 55 \n \n \n Landsdel (NUTS): Fyn (DK031)\n \n Enhed: Christina From-Nielsen\n \n \n Internetadresse: https://www.sdu.dk/\n Denne organisations roller:\n Organisation, der leverer supplerende oplysninger om udbudsproceduren\n \n \n 8.1 ORG-1000Officielt navn: Comdia ApS\n Registreringsnummer: 33501404\n Postadresse: Lindvedvej 73 \n \n \n Landsdel (NUTS): Fyn (DK031)\n \n E-mail: support@comdia.com\n \n Internetadresse: https://www.comdia.com/\n Denne organisations roller:\n \n \n 8.1 ORG-1001Officielt navn: Klagenævnet for Udbud\n Registreringsnummer: 37795526\n Postadresse: Nævnenes Hus, Toldboden 2 \n \n \n Landsdel (NUTS): Vestjylland (DK041)\n \n E-mail: klfu@naevneneshus.dk\n \n Internetadresse: http://www.klfu.dk\n Denne organisations roller:Organisation med ansvar for klager\n \n \n 8.1 ORG-1002Officielt navn: Konkurrence- og Forbrugerstyrelsen\n Registreringsnummer: 10294819\n Postadresse: Carl Jacobsens Vej 35 \n \n \n Landsdel (NUTS): Københavns omegn (DK012)\n \n \n \n Internetadresse: https://www.kfst.dk/\n Denne organisations roller:Organisation, der leverer yderligere oplysninger om klageprocedurerne\n \n \n 8.1 ORG-0002Officielt navn: Freemelt AB,\n Den økonomiske operatørs størrelse: Mellemstor virksomhed\n Registreringsnummer: SE556714278201\n Postadresse: Fiskhamnsgatan 6A, \n \n \n Landsdel (NUTS): Västra Götalands län (SE232)\n \n E-mail: adam.fraczyk@freemelt.com\n Denne organisations roller:\n Vinder af disse delkontrakter: LOT-0000\n \n \n \n Oplysninger om bekendtgørelsenBekendtgørelsens ID: 26cc90b2-a925-4b3f-8d35-a409d2295196 - 01\n \n Bekendtgørelsestype: Bekendtgørelse om indgåede kontrakter eller koncessionstildeling – standardordningen\n Afsendelsesdato for bekendtgørelsen: 12-08-2025 08:56 +02:00\n Bekendtgørelsens officielle sprog: dansk \n Bekendtgørelsesnummer: 00530005-2025\n \n Offentliggørelsesdato: 13-08-2025\n \n \n","htmlEN":"\n\n \n 1 Buyer1.1 BuyerOfficial name: Syddansk Universitet\n Legal type of the buyer: Body governed by public law\n Activity of the contracting authority: Education\n \n \n 2 Procedure2.1 ProcedureTitle: Metal 3D printer for SDU\n Description: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2. Technology patents:\n Specifically, the ProHeat, electron gun (which provides high beam powerfor a small\n beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies.\n The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU\n towards printing specific lower-conductive alloys. The well-known smoking issues of\n EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely\n addressesthis. These are key differentiators that set Freemelt apart from the competition.\n The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent),\n JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1\n – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN
3. Spot melting: SDU wants to\n alternate the scanning strategies with full control, i.e. not onlychanging the stripe\n pattern, but allowing for the transition to point scanning with completefunctionalization\n of the pattern. The PixelMelt feature of Freemelt supports this uniquely.
4.\n In-situ monitoring: SDU expects to integrate monitoring features (cameras, pyrometers,\n etc.)directly into the hardware, and the integration-ready state of the Freemelt product,\n with its rangeof dedicated ports, is a strong asset.\n Procedure identifier: c3e7b251-37fe-4154-94fd-f3d5ab01372e\n Previous notice: 444248-2025\n Internal identifier: 522332\n Type of procedure: Negotiated without prior call for competition\n 2.1.1 PurposeMain nature of the contract: Supplies\n Main classification (cpv): 42600000 Machine tools\n Additional classification (cpv): 42990000 Miscellaneous special-purpose machinery\n Additional classification (cpv): 43800000 Workshop equipment\n \n 2.1.2 Place of performance\n \n 2.1.4 General information\n \n Applicable cross-border law: Public Procurement Act Section 80, litra 3 and 4 - Only one supplier:
Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical
specifications.\n There is an objective and proportionate reason for the establishment of specifications\n which result in there being only one supplier. The possibility that there are other\n potential suppliers who could deliver the same has been objectively excluded by market\n consultations.\n \n \n \n 5 Lot5.1 Lot technical ID: LOT-0000Title: Metal 3D printer for SDU\n Description: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2.
Technology\n patents: Specifically, the ProHeat, electron gun (which provides high beam powerfor\n a small beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies.\n The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU\n towards printing specific lower-conductive alloys. The well-known smoking issues of\n EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely\n addressesthis. These are key differentiators that set Freemelt apart from the competition.\n The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent),\n JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1\n – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN
3.
Spot melting: SDU\n wants to alternate the scanning strategies with full control, i.e. not onlychanging\n the stripe pattern, but allowing for the transition to point scanning with completefunctionalization\n of the pattern. The PixelMelt feature of Freemelt supports this uniquely.
4.\n
In-situ monitoring: SDU expects to integrate monitoring features (cameras,\n pyrometers, etc.)directly into the hardware, and the integration-ready state of the\n Freemelt product, with its rangeof dedicated ports, is a strong asset.\n Internal identifier: 522332\n 5.1.1 PurposeMain nature of the contract: Supplies\n Main classification (cpv): 42600000 Machine tools\n Additional classification (cpv): 42990000 Miscellaneous special-purpose machinery\n Additional classification (cpv): 43800000 Workshop equipment\n \n 5.1.2 Place of performance\n \n \n 5.1.3 Estimated duration\n \n \n \n 5.1.6 General informationProcurement Project not financed with EU Funds.\n The procurement is covered by the Government Procurement Agreement (GPA): yes\n Additional information: Public Procurement Act Section 80, litra 3 and 4 - Only one supplier:
Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical
specifications.\n There is an objective and proportionate reason for the establishment of specifications\n which result in there being only one supplier. The possibility that there are other\n potential suppliers who could deliver the same has been objectively excluded by market\n consultations.\n \n 5.1.10 Award criteriaCriterion:\n Description: Public Procurement Act Section 80, litra 3 and 4 - Only one
supplier: Freemelt\n ONE EB-PBF Metal 3D printer can only be supplied by Freemelt AB, because it is the\n only known commercial supplier of a system with these technical specifications. There\n is an objective and proportionate reason for the establishment of specifications which\n result in there being only one supplier. The possibility that there are other potential\n suppliers who could deliver the same has been objectively excluded by market consultations.
The\n contract can be provided only by a particular economic operator because of an absence\n
of competition for technical reasons\n Category of award threshold criterion: Weight (percentage, exact)Award criterion number: 100\n \n \n \n 5.1.15 Techniques\n Information about the dynamic purchasing system:No dynamic purchase system\n \n \n 5.1.16 Further information, mediation and reviewReview organisation: Klagenævnet for Udbud\n Information about review deadlines: I henhold til lov om Klagenævnet for Udbud m.v. (loven kan hentes på www.retsinformation.dk),\n gælder følgende frister for indgivelse af klage:
Klage over ikke at være blevet\n udvalgt skal være indgivet til Klagenævnet for Udbud inden 20 kalenderdage, jf.lovens\n § 7, stk. 1, fra dagen efter afsendelse af en underretning til de berørte ansøgere\n om, hvem der er blevet udvalgt, når underretningen er ledsaget af en begrundelse for\n beslutningen i overensstemmelse med lovens §2, stk. 1, nr. 1, og udbudslovens § 171,\n stk. 2.
I andre situationer skal klage over udbud, jf.lovens § 7, stk. 2, være\n indgivet til Klagenævnet for Udbud inden:
1) 45 kalenderdage efter at ordregiveren\n har offentliggjort en bekendtgørelse i Den Europæiske Unions Tidende om, at ordregiveren\n har indgået en kontrakt.Fristen regnes fra dagen efter den dag, hvor bekendtgørelsen\n er blevet offentliggjort.
2) 20 kalenderdage regnet fra dagen efter at ordregiveren\n har meddelt sin beslutning, jf.udbudslovens § 185, stk. 2.
Senest samtidig med\n at en klage indgives til Klagenævnet for Udbud, skal klageren skriftligt underrette\n ordregiveren om, at klage indgives til Klagenævnet for Udbud, og om hvorvidt klagen\n er indgivet i standstill - perioden, jf.lovens § 6, stk. 4.I tilfælde hvor klagen\n ikke er indgivet i standstill - perioden, skal klageren tillige angive, hvorvidt der\n begæres opsættende virkning af klagen, jf.lovens § 12, stk. 1.
Klagenævnet for\n Udbuds e-mailadresse er angivet i punkt VI.4.1).
Klagenævnet for Udbuds klagevejledning\n kan findes på: www.erhvervsstyrelsen.dk.\n Organisation providing additional information about the procurement procedure: Syddansk Universitet\n Organisation providing more information on the review procedures: Konkurrence- og Forbrugerstyrelsen\n \n \n \n 6 ResultsValue of all contracts awarded in this notice: 2.496.268,66 Danish krone\n Direct award:Justification for direct award: The contract can be provided only by a particular economic operator because of an absence of competition for technical reasons\n Other justification: SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different\n type of machine than the laser powder bed fusion they currently own. Scientifically,\n it has been agreed among colleagues that the new machine should be an Electron Beam\n Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM\n landscape in Denmark. To this end, management is willing to invest in the acquisition\n of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF\n globally, Freemelt stands out as the sole manufacturer with a product that fits the\n technical demand. Moreover, its targetting of lab environments is an essential asset,\n supported heavily by what SDU considers mandatory features such as the ones listed\n below. It is important to observe that SDU not only expects a combination of some\n of these features, but finds all of them mandatory to align with its research track.\n Freemelt is therefore found to be the sole manufacturer that can achieve all desirables\n from SDU.
1.Open-source and open-architecture: The approach allows for flexibility\n and adaptability,which is a significant advantage in meeting evolving needs. While\n other machines are of greatquality, the fully open-source nature of Freemelt is unique.\n It is a hard requirement from SDUthat the software is completely open, with full and\n complete feature control which can be codeddirectly.
2.Technology patents: Specifically,\n the ProHeat, electron gun (which provides high beam powerfor a small beam size, crucial\n for high productivity with tungsten), and spot preheatingtechnologies. The ProHeat\n feature is unique to Freemelt, and it is a mandatory requirement forSDU towards printing\n specific lower-conductive alloys. The well-known smoking issues of EB-PBF constitute\n a mandatory issue to be avoided for SDU, and the ProHeat uniquely addressesthis. These\n are key differentiators that set Freemelt apart from the competition. The relevantpatents\n are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent), JP7384366B2\n – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1 – BUILD COMPARTMENT\n WITH SELF-SEALINGDESIGN
3.Spot melting: SDU wants to alternate the scanning strategies\n with full control, i.e. not onlychanging the stripe pattern, but allowing for the\n transition to point scanning with completefunctionalization of the pattern. The PixelMelt\n feature of Freemelt supports this uniquely.
4.In-situ monitoring: SDU expects\n to integrate monitoring features (cameras, pyrometers, etc.)directly into the hardware,\n and the integration-ready state of the Freemelt product, with its rangeof dedicated\n ports, is a strong asset.\n \n 6.1 Result lot ldentifier: LOT-0000At least one winner was chosen.\n 6.1.2 Information about winnersWinner:Official name: Freemelt AB,\n \n \n Identifier of lot or group of lots: LOT-0000\n Value of the tender: 2.496.268,66 Danish krone\n \n Contract information:Identifier of the contract: 96606\n Title: Metal 3D printer for SDU / Freemelt AB,\n Date on which the winner was chosen: 01-07-2025\n Date of the conclusion of the contract: 23-07-2025\n \n \n \n 6.1.4 Statistical informationReceived tenders or requests to participate:Type of received submissions: TendersNumber of tenders or requests to participate received: 0\n \n \n \n \n \n 8 Organisations8.1 ORG-0001Official name: Syddansk Universitet\n Registration number: 29283958\n Postal address: Campusvej 55 \n \n \n Country subdivision (NUTS): Fyn (DK031)\n \n Contact point: Christina From-Nielsen\n \n \n Internet address: https://www.sdu.dk/\n Roles of this organisation:\n Organisation providing additional information about the procurement procedure\n \n \n 8.1 ORG-1000Official name: Comdia ApS\n Registration number: 33501404\n Postal address: Lindvedvej 73 \n \n \n Country subdivision (NUTS): Fyn (DK031)\n \n Email: support@comdia.com\n \n Internet address: https://www.comdia.com/\n Roles of this organisation:\n \n \n 8.1 ORG-1001Official name: Klagenævnet for Udbud\n Registration number: 37795526\n Postal address: Nævnenes Hus, Toldboden 2 \n \n \n Country subdivision (NUTS): Vestjylland (DK041)\n \n Email: klfu@naevneneshus.dk\n \n Internet address: http://www.klfu.dk\n Roles of this organisation:\n \n \n 8.1 ORG-1002Official name: Konkurrence- og Forbrugerstyrelsen\n Registration number: 10294819\n Postal address: Carl Jacobsens Vej 35 \n \n \n Country subdivision (NUTS): Københavns omegn (DK012)\n \n \n \n Internet address: https://www.kfst.dk/\n Roles of this organisation:Organisation providing more information on the review procedures\n \n \n 8.1 ORG-0002Official name: Freemelt AB,\n Size of the economic operator: Medium\n Registration number: SE556714278201\n Postal address: Fiskhamnsgatan 6A, \n \n \n Country subdivision (NUTS): Västra Götalands län (SE232)\n \n Email: adam.fraczyk@freemelt.com\n Roles of this organisation:\n Winner of these lots: LOT-0000\n \n \n \n Notice informationNotice identifier/version: 26cc90b2-a925-4b3f-8d35-a409d2295196 - 01\n \n Notice type: Contract or concession award notice – standard regime\n Notice dispatch date: 12-08-2025 08:56 +02:00\n Languages in which this notice is officially available: Danish \n Notice publication number: 00530005-2025\n OJ S issue number: 154/2025\n Publication date: 13-08-2025\n \n \n","opsummeringDA":{"card":{"titel":"Metal 3D printer for SDU","ordregiver":"Syddansk Universitet","ordregiverId":"29283958","ordregiverIdDatavasket":"29283958","publiceringsdato":"2025-08-13+02:00","cpvKode":"42600000","cpvTitel":"Værktøjsmaskiner","formulartype":"Resultater","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Syddansk Universitet"],"beskrivelse":"SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different type of machine than the laser powder bed fusion they currently own. Scientifically, it has been agreed among colleagues that the new machine should be an Electron Beam Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM landscape in Denmark. To this end, management is willing to invest in the acquisition of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF globally, Freemelt stands out as the sole manufacturer with a product that fits the technical demand. Moreover, its targetting of lab environments is an essential asset, supported heavily by what SDU considers mandatory features such as the ones listed below. It is important to observe that SDU not only expects a combination of some of these features, but finds all of them mandatory to align with its research track. Freemelt is therefore found to be the sole manufacturer that can achieve all desirables from SDU. \n\n1.Open-source and open-architecture: The approach allows for flexibility and adaptability,which is a significant advantage in meeting evolving needs. While other machines are of greatquality, the fully open-source nature of Freemelt is unique. It is a hard requirement from SDUthat the software is completely open, with full and complete feature control which can be codeddirectly. \n\n2. Technology patents: Specifically, the ProHeat, electron gun (which provides high beam powerfor a small beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies. The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU towards printing specific lower-conductive alloys. The well-known smoking issues of EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely addressesthis. These are key differentiators that set Freemelt apart from the competition. The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent), JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1 – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN \n\n3. Spot melting: SDU wants to alternate the scanning strategies with full control, i.e. not onlychanging the stripe pattern, but allowing for the transition to point scanning with completefunctionalization of the pattern. The PixelMelt feature of Freemelt supports this uniquely. \n\n4. In-situ monitoring: SDU expects to integrate monitoring features (cameras, pyrometers, etc.)directly into the hardware, and the integration-ready state of the Freemelt product, with its rangeof dedicated ports, is a strong asset.","bkSubTypeKode":"29","bkSubType":"Bekendtgørelse om indgåede kontrakter – det generelle direktiv, standardordningen","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":[],"udforelsesstedSubLand":[],"udforelsesstedLand":[],"udforelsesstedBy":[],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]},"opsummeringEN":{"card":{"titel":"Metal 3D printer for SDU","ordregiver":"Syddansk Universitet","ordregiverId":"29283958","ordregiverIdDatavasket":"29283958","publiceringsdato":"2025-08-13+02:00","cpvKode":"42600000","cpvTitel":"Machine tools","formulartype":"Result","formulartypeKode":"result","tidsfrister":[],"alleOrdregivere":["Syddansk Universitet"],"beskrivelse":"SDU wants to expand its metal Additive Manufacturing (AM) capabilities with a different type of machine than the laser powder bed fusion they currently own. Scientifically, it has been agreed among colleagues that the new machine should be an Electron Beam Powder Bed Fusion (EB-PBF) device. This helps give SDU a unique profile in the AM landscape in Denmark. To this end, management is willing to invest in the acquisition of a new 3D printer. Looking at the market, among the very few manufacturers of EB-PBF globally, Freemelt stands out as the sole manufacturer with a product that fits the technical demand. Moreover, its targetting of lab environments is an essential asset, supported heavily by what SDU considers mandatory features such as the ones listed below. It is important to observe that SDU not only expects a combination of some of these features, but finds all of them mandatory to align with its research track. Freemelt is therefore found to be the sole manufacturer that can achieve all desirables from SDU. \n\n1.Open-source and open-architecture: The approach allows for flexibility and adaptability,which is a significant advantage in meeting evolving needs. While other machines are of greatquality, the fully open-source nature of Freemelt is unique. It is a hard requirement from SDUthat the software is completely open, with full and complete feature control which can be codeddirectly. \n\n2. Technology patents: Specifically, the ProHeat, electron gun (which provides high beam powerfor a small beam size, crucial for high productivity with tungsten), and spot preheatingtechnologies. The ProHeat feature is unique to Freemelt, and it is a mandatory requirement forSDU towards printing specific lower-conductive alloys. The well-known smoking issues of EB-PBF constitute a mandatory issue to be avoided for SDU, and the ProHeat uniquely addressesthis. These are key differentiators that set Freemelt apart from the competition. The relevantpatents are US12062518B2 – CATHODE ASSEMBLY FOR ELECTRON GUN (grantedpatent), JP7384366B2 – PREHEATING OF POWDER BED, JP7302145B2 – SPOTPREHEATING, EP3784473B1 – BUILD COMPARTMENT WITH SELF-SEALINGDESIGN \n\n3. Spot melting: SDU wants to alternate the scanning strategies with full control, i.e. not onlychanging the stripe pattern, but allowing for the transition to point scanning with completefunctionalization of the pattern. The PixelMelt feature of Freemelt supports this uniquely. \n\n4. In-situ monitoring: SDU expects to integrate monitoring features (cameras, pyrometers, etc.)directly into the hardware, and the integration-ready state of the Freemelt product, with its rangeof dedicated ports, is a strong asset.","bkSubTypeKode":"29","bkSubType":"Contract award notice – general directive, standard regime","erAendring":false},"indholdsType":"HENTET_FRA_TED","sekundaereOrdregivere":[],"udforelsesstedNutsCode":[],"udforelsesstedSubLand":[],"udforelsesstedLand":[],"udforelsesstedBy":[],"tilbudsfrister":[],"intressentfrister":[],"deltagelsefrister":[],"svarfrister":[],"antalParts":0,"antalLots":1,"udbudsDokumenter":[]}}